Current-Sensning-DC
shreyashswarnkar210205·Current-Sensning-DC·Sense/Sense.kicad_sch
About the Current-Sensning-DC PCB
Current-Sensning-DC is an open source PCB design by shreyashswarnkar210205, published on GitHub. It is a board, with 16 components from 15 distinct parts.
Other key parts include the INA219AxD. By type, the board carries 6 resistors, 3 connectors, 2 diodes, 2 capacitors, 1 IC and 1 transistor.
It belongs with the test & measurement designs in this gallery.
From the project
This project is a low-side power switching PCB with real-time current measurement using the INA219 current-sense IC. It is designed to safely switch DC loads (motors, relays, solenoids, LED strips, etc.) while continuously monitoring load current and bus voltage over I²C.
This project is a low-side power switching PCB with real-time current measurement using the INA219 current-sense IC. It is designed to safely switch DC loads (motors, relays, solenoids, LED strips, etc.) while continuously monitoring load current and bus voltage over I²C.
The design focuses on correct current paths, protection, and PCB layout practices used in real-world embedded hardware.
Main components on the Current-Sensning-DC
Current-Sensning-DC bill of materials (BOM)
16 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA219AxD | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | Supply_IN | BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J1 |
| 1 | LOAD | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Conn_01x05_Pin | PinSocket_1x05_P2.54mm_Vertical | J4 |
| 1 | TestPoint | TestPoint_Pad_1.0x1.0mm | TP1 |
| 1 | LED | LED_2512_6332Metric_Pad1.52x3.35mm_HandSolder | D1 |
| 1 | 1N5819 | D_1210_3225Metric_Pad1.42x2.65mm_HandSolder | D2 |
| 1 | 47u | CP_EIA-1608-10_AVX-L_Pad1.25x1.05mm_HandSolder | C1 |
| 1 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | R | R_1218_3246Metric_Pad1.22x4.75mm_HandSolder | R1 |
| 1 | 10k | R_1218_3246Metric_Pad1.22x4.75mm_HandSolder | R2 |
| 1 | 0.1 | R_1218_3246Metric_Pad1.22x4.75mm_HandSolder | R4 |
| 2 | 4k7 | R_1218_3246Metric_Pad1.22x4.75mm_HandSolder | R5, R6 |
| 1 | 220 | R_1218_3246Metric_Pad1.22x4.75mm_HandSolder | R7 |
Current-Sensning-DC design files
The KiCad project lives in the shreyashswarnkar210205/Current-Sensning-DC repository on GitHub; these links point at the commit this page was built from.
- SchematicSense/Sense.kicad_sch
Current-Sensning-DC: common questions
How many components are on the Current-Sensning-DC?
16 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Current-Sensning-DC design files?
From the shreyashswarnkar210205/Current-Sensning-DC repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Current-Sensning-DC design in my own project?
The repository has no license, so all rights stay with shreyashswarnkar210205. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528