HardLabs

Kicad board-2026-07-27-hm blueremote-12

SimulatedFlow·kicad-board-2026-07-27-hm-blueremote-12

Kicad board-2026-07-27-hm blueremote-12 layout, top view — open source STM32 board by SimulatedFlow

About the Kicad board-2026-07-27-hm blueremote-12

Kicad board-2026-07-27-hm blueremote-12 is an open source STM32 PCB design by SimulatedFlow, published on GitHub under the Custom license license. It is a 4-layer board measuring 100 × 60 mm, with 19 components from 19 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the CC1101. By type, the board carries 12 switches, 2 ICs, 2 capacitors, 1 connector, 1 LED and 1 resistor.

From the project

Homematic-compatible 12-button handheld remote based on the STM32 Bluepill. Bare PCB, hand-solderable THT. KiCad source files.

This repository contains the full design files of a commercial hardware board. It is source-available, not open source: read it, evaluate it, then buy a license to use it. See LICENSE.md (source-available, purchase required).

Get it / Buy: - Order on eBay (this board, bare PCB): https://www.ebay.de/itm/398223886097 - Product page (specs, photos, price): https://simulatedflow.teufel-engineering.com/platinen/2026-07-27-hm-blueremote-12/ - eBay store — all our boards and PCB art: https://www.ebay.de/usr/simula-9 - Merch shop (dev & gaming): https://simulatedflow.myspreadshop.de - Merch shop…

Main components on the Kicad board-2026-07-27-hm blueremote-12

STM32F103C8T6CC1101

Kicad board-2026-07-27-hm blueremote-12 bill of materials (BOM)

19 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F103C8T6
U1
1
CC1101
U2
1
2xAAA 3V0
J1
1
BTN1
SW1
1
BTN2
SW2
1
BTN3
SW3
1
BTN4
SW4
1
BTN5
SW5
1
BTN6
SW6
1
BTN7
SW7
1
BTN8
SW8
1
BTN9
SW9
1
BTN10
SW10
1
BTN11
SW11
1
BTN12
SW12
1
STATUS
LED1
1
100nF
C1
1
10uF
C2
1
330
R1

Kicad board-2026-07-27-hm blueremote-12 design files

The KiCad project lives in the SimulatedFlow/kicad-board-2026-07-27-hm-blueremote-12 repository on GitHub; these links point at the commit this page was built from.

Kicad board-2026-07-27-hm blueremote-12: common questions

What microcontroller does the Kicad board-2026-07-27-hm blueremote-12 use?

The Kicad board-2026-07-27-hm blueremote-12 is built around the STM32F103C8T6, from the STM32 family.

How big is the Kicad board-2026-07-27-hm blueremote-12?

The Kicad board-2026-07-27-hm blueremote-12 measures 100 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Kicad board-2026-07-27-hm blueremote-12?

19 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kicad board-2026-07-27-hm blueremote-12 design files?

From the SimulatedFlow/kicad-board-2026-07-27-hm-blueremote-12 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Kicad board-2026-07-27-hm blueremote-12 design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Can I test firmware for the Kicad board-2026-07-27-hm blueremote-12 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards