Vape MK16
SirBramble·Vape-MK16·01 PCB/01 Main Module/Vape MK16.kicad_pcb
About the Vape MK16 PCB
Vape MK16 is an open source STM32 PCB design by SirBramble, published on GitHub. It is a 4-layer board measuring 102 × 52 mm, with 98 components from 49 distinct parts.
Its main chip is the STM32L412KBT6, from the STM32 family. Other key parts include the DIO6913TST6, BQ25887RGER, 24FC01T-I/OT, FUSB302B10MPX and 1048P. By type, the board carries 40 resistors, 28 capacitors, 10 ICs, 5 transistors, 5 connectors and 4 diodes.
Main components on the Vape MK16
Vape MK16 bill of materials (BOM)
98 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DIO6913TST6 | SOT95P280X90-6N | IC201 |
| 1 | BQ25887RGER | QFN50P400X400X100-25N-D | IC301 |
| 1 | 24FC01T-I/OT 24FC01T-I_OT | SOT-23-5 | IC801 |
| 1 | FUSB302B10MPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U201 |
| 1 | 1048P | 1048P | U301 |
| 1 | AZ1117-3.3 | SOT-223-3_TabPin2 | U402 |
| 1 | STM32L412KBT6 | LQFP-32_7x7mm_P0.8mm | U501 |
| 1 | FAN3111E | SOT-23-5 | U601 |
| 1 | ACS72981LLRATR-100U3 | Allegro_PSOF-7_4.8x6.4mm_P1.60mm | U602 |
| 1 | SN74LVC1G14DBV | SOT-23-5 | U701 |
| 3 | T2N7002AK,LM | SOT-23-3 | Q402, Q403, Q901 |
| 1 | PJA3433_R1_00001 | SOT-23-3 | Q404 |
| 1 | PSMN4R0-30YLDX PSMN1R2-25YLDX | BUK7Y6R060EX | Q602 |
| 1 | BUTTON PCB DATA | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J103 |
| 1 | BUTTON PCB POWER | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J104 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J201 |
| 1 | Vape Button | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J701 |
| 1 | VAPE LED | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J702 |
| 1 | POWER SWITCH | SLW-864547-5A-RA-D | SW101 |
| 2 | PTS636 SP50 | PTS636SP50SMTRLFS | SW501, SW502 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NTCGS163JF103FT7 | R_0603_1608Metric | TH301 |
| 2 | PESD5V0L1BSLAZ | D_SOD-882 | D201, D202 |
| 1 | RED | 155124RS73200 | D301 |
| 1 | RB521S30T5G | D_SOD-523 | D901 |
| 1 | 6.8UH 6.8uH | ETQP3M_KVN | L201 |
| 1 | 1UH 1uH | INDC2520X100N | L301 |
| 11 | 100NF 100nF | C_0603_1608Metric | C201, C206, C207, C501, C502, C505, C601, C603 +3 |
| 1 | 22PF 22pF | C_0603_1608Metric | C202 |
| 4 | 10UF 10uF | C_1206_3216Metric | C203, C304, C306, C401 |
| 5 | 22UF 22uF | C_0805_2012Metric | C204, C205, C303, C305, C402 |
| 2 | 330PF 330pF | C_0603_1608Metric | C208, C209 |
| 1 | 47NF 47nF | C_0603_1608Metric | C301 |
| 2 | 4U7F 4u7F | C_1206_3216Metric | C302, C504 |
| 1 | 1UF 1uF | C_0603_1608Metric | C503 |
| 1 | 10NF 10nF | C_0603_1608Metric | C602 |
| 3 | 2K2 2k2 | R_0603_1608Metric | R101, R102, R301 |
| 14 | 100K 100k | R_0603_1608Metric | R201, R202, R204, R312, R313, R314, R315, R401 +6 |
| 1 | 15K 15k | R_0603_1608Metric | R203 |
| 6 | 82 | R_1206_3216Metric | R302, R303, R304, R305, R306, R307 |
| 2 | 383 | R_0603_1608Metric | R308, R309 |
| 1 | 5.23K 5.23k | R_0603_1608Metric | R310 |
| 1 | 30.1K 30.1k | R_0603_1608Metric | R311 |
| 4 | 1k | R_0603_1608Metric | R403, R404, R602, R901 |
| 1 | 51K 51k | R_0603_1608Metric | R503 |
| 2 | 33K 33k | R_0603_1608Metric | R504, R505 |
| 1 | 56K 56k | R_0603_1608Metric | R506 |
| 1 | 33 | R_1206_3216Metric | R601 |
| 1 | 1M | R_0603_1608Metric | R603 |
| 2 | 10K 10k | R_0603_1608Metric | R701, R702 |
Vape MK16 design files
The KiCad project lives in the SirBramble/Vape-MK16 repository on GitHub; these links point at the commit this page was built from.
Vape MK16: common questions
What microcontroller does the Vape MK16 use?
The Vape MK16 is built around the STM32L412KBT6, from the STM32 family.
How big is the Vape MK16 PCB?
The Vape MK16 measures 102 × 52 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Vape MK16?
98 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Vape MK16 design files?
From the SirBramble/Vape-MK16 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Vape MK16 design in my own project?
The repository has no license, so all rights stay with SirBramble. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Vape MK16 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Vape-MK16
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k