37 open source boards using the SN74LVC1G14DBV
Real designs built with the SN74LVC1G14DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Auxiliary board
reubenstr
93 × 56 mm31 parts2LNo license242Microchip SAM
WPT TX
mark-belbin
100 × 45 mm117 parts4LGPL-3.073SlideScanner
filmolino
50 × 50 mm37 parts2LGPL-3.028FPGA
Bkm-68x simple
skumlos
230.4 × 233.5 mm206 parts2LCERN-OHL-W-2.07CCFL2LED
mijuc
55 × 90 mm57 parts2LGPL-3.07Qsd2
Greg-R
100 × 75 mm68 parts2LGPL-3.04STM32
FailDeadly
yvoronkin
70 × 25 mm92 parts4LCustom license3FPGA
MA-XILINX-FPGA-10-LAYER
moafkaljabi
84.2 × 53.6 mm425 parts10LNo license1Motherboard
morzack
125 × 85 mm194 parts4LNo license1Main ext
roman-khvatov
155 × 93 mm165 parts4LMIT1Qse2
Greg-R
100 × 75 mm80 parts2LGPL-3.01RP2040/RP2350
Pico H-bridge complete
rosstimo
84.1 × 66 mm77 parts4LCC-BY-NC-4.01Raspberry Pi
Auxiliary board
akshatbansaltech
93 × 56 mm31 parts2LMIT1FE-FEAR16v2-PCB-Mainboard
Dephrilibrium
224 × 395 mm408 parts4LGPL-3.00STM32
Clock
fluffy
119 × 92 mm192 parts2LBSD-3-Clause0Raspberry Pi
Piridium bus
Alan-JH
90.2 × 95.9 mm156 parts4LCC-BY-NC-4.00SC-LED-CUBE-10x10x10
Oscyloskop444
98 × 98 mm131 parts2LNo license0STM32
Vape MK16
SirBramble
102 × 52 mm98 parts4LNo license0PIC
Controls-2025-electrical
waterloo-rocketry
50.2 × 40 mm82 parts4LNo license0NXP
Teensy sdr
electron271
102 × 76.5 mm61 parts2LNo license0- schematic only · 217 parts
Sr99-keyboard
Tecsmith
217 partsMIT0 FPGA
Robot
roman-khvatov
130 × 156 mm161 parts2LMIT1STM32
Blink
fluffy
119 × 92 mm131 parts2LBSD-3-Clause0Button Module
SirBramble
82.5 × 14 mm19 parts2LNo license0ReZyklus.memory cartridge
jeroenhn
73.7 × 45.1 mm48 parts2LNo license14Generic
roman-khvatov
108.2 × 114.7 mm154 parts2LMIT1RP2040/RP2350
Pump board
TrendBit
90 × 100 mm181 parts4LGPL-3.00Main int
roman-khvatov
135 × 85 mm151 parts4LMIT1STM32
GPS
fluffy
119 × 92 mm80 parts2LBSD-3-Clause0Reg
magik6k
92.4 × 37.6 mm21 parts2LCustom license3RISC-V
Tetris
roman-khvatov
33 × 91.7 mm76 parts4LMIT1Extension
roman-khvatov
73 × 50 mm56 parts2LMIT1Magnetic encoder
Froggy111
50 × 50 mm21 parts2LNo license1Powmeter
roman-khvatov
27.3 × 59.7 mm38 parts2LMIT1Panel
roman-khvatov
117 × 78 mm37 parts2LMIT1Ledflash
roman-khvatov
22.9 × 33.7 mm25 parts2LMIT1
How designs wire the SN74LVC1G14DBV
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the SN74LVC1G14DBV connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 18 of 24 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 96% | — |
| GNDpin 3 | Connected to: GND 96% | — |
| PB3pin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 3.3V 84% · a signal 16% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Auxiliary board by reubenstr, WPT TX by mark-belbin, SlideScanner by filmolino and ReZyklus.memory cartridge by jeroenhn.
The SN74LVC1G14DBV in open source designs
The gallery holds 37 open source boards using the SN74LVC1G14DBV from 25 GitHub repositories; a typical one measures about 93 × 75.8 mm and carries around 80 components.
64% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is Auxiliary board by reubenstr.
Parts used alongside the SN74LVC1G14DBV
Microcontrollers on boards using the SN74LVC1G14DBV
What boards using the SN74LVC1G14DBV are built for
SN74LVC1G14DBV: common questions
Where can I find a SN74LVC1G14DBV reference design?
Each of the 37 boards on this page is a real design using the SN74LVC1G14DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G14DBV VCC pin?
The VCC pin has a decoupling capacitor on 18 of 24 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 24 open source designs using the SN74LVC1G14DBV.
What parts are used alongside the SN74LVC1G14DBV?
The UA78M05IDCYR, AMS1117-3.3, AP7343, BNO055_Module and SN74CBT3253 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1G14DBV use?
Most are built on STM32 (5), FPGA (3), Raspberry Pi (3) and RP2040/RP2350 (2).
How big is a typical board using the SN74LVC1G14DBV?
The median is 93 × 75.8 mm, and 64% are two-layer designs.
What is the most popular open source board using the SN74LVC1G14DBV?
By GitHub stars, Auxiliary board by reubenstr, with 242 stars.
Can I simulate one of these boards using the SN74LVC1G14DBV before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.