USB PD
About the USB PD PCB
USB PD is an open source PCB design by Sitengwu, published on GitHub. It is a 2-layer board measuring 41.5 × 50 mm, with 23 components from 21 distinct parts.
Other key parts include the AO3400A, IP2721, TPS5430DDAR and TYPE-C_6P. By type, the board carries 6 connectors, 6 capacitors, 5 resistors, 4 ICs, 1 diode and 1 inductor.
It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.
Main components on the USB PD
USB PD bill of materials (BOM)
23 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AO3400A | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U1 |
| 1 | IP2721 | TSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL | U2 |
| 1 | TPS5430DDAR | ESOP-8_L4.9-W3.9-P1.27-LS6.0-TL-EP | U3 |
| 1 | TYPE-C_6P | TYPE-C-SMD_TYPE-C-6P | U4 |
| 1 | C5203987 VCC | CONN-SMD_YZF0002-38080-02 | J3 |
| 1 | C5203987 TX | CONN-SMD_YZF0002-38080-02 | J4 |
| 1 | C5203987 RX | CONN-SMD_YZF0002-38080-02 | J5 |
| 1 | C5203987 CFG | CONN-SMD_YZF0002-38080-02 | J6 |
| 1 | C5203987 SEL | CONN-SMD_YZF0002-38080-02 | J7 |
| 1 | C5203987 GND | CONN-SMD_YZF0002-38080-02 | J8 |
| 1 | SS34 | SMA_L4.3-W2.6-LS5.2-RD | D1 |
| 1 | 22UH 22uH | IND-SMD_L7.3-W6.6_MHCI06030 | L1 |
| 1 | 1UF 1uF | C_0603_1608Metric | C1 |
| 2 | 4.7UF 4.7uF | C_0805_2012Metric | C2, C3 |
| 1 | 10UF 10uF | C_0603_1608Metric | C4 |
| 1 | 10NF 10nF | C_0805_2012Metric | C5 |
| 1 | 220UF 220uF | CAP-SMD_L3.5-W2.8 | C6 |
| 1 | 100K 100k | R_0603_1608Metric | R1 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R2, R3 |
| 1 | 12K 12k | R_0603_1608Metric | R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3.9K 3.9k | R_0603_1608Metric | R5 |
USB PD design files
The KiCad project lives in the Sitengwu/IOT_Retro_Display_EEE4022S repository on GitHub; these links point at the commit this page was built from.
USB PD: common questions
How big is the USB PD PCB?
The USB PD measures 41.5 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB PD?
23 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB PD design files?
From the Sitengwu/IOT_Retro_Display_EEE4022S repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB PD design in my own project?
The repository has no license, so all rights stay with Sitengwu. Use it as a reference, and ask the author before reusing the design.
More boards in IOT_Retro_Display_EEE4022S
Similar boards
View screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
LevelShifterBreakout
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k