CBM-II-Fastbus

sjgray·CBM-II-Fastbus

CBM-II-Fastbus PCB layout, top view — open source board by sjgray

About the CBM-II-Fastbus PCB

CBM-II-Fastbus is an open source PCB design by sjgray, published on GitHub. It is a 2-layer board measuring 77.3 × 50 mm, with 33 components from 20 distinct parts.

Other key parts include the 7406, 555 and 74LS641. By type, the board carries 11 diodes, 7 connectors, 5 capacitors, 5 resistors, 4 ICs and 1 switch.

From the project

CBM II Serial IEC Fastbus for User Port

CBM-II Fastbus - AKA B128 Serial Bus adapter for User Port ============== - Remade by Steve J. Gray www.cbmsteve.ca

This is a remake of the B128 Serial Bus adapter by Anderson Communications Engineering. This adds an IEC connector to the CBM-II machines to be able to communicate with SERIAL drives such as the 1541, 1571, 1581 etc, as well as other peripherals including modern devices such as the SD2IEC.

Main components on the CBM-II-Fastbus

CBM-II-Fastbus bill of materials (BOM)

33 components, 20 distinct parts.

QtyPartRefs
2
7406
U1, U2
1
555
U5
1
74LS641
U6
1
DIN-6
CN1
1
UserPort Header
J1
1
EXT Power
J2
1
Reset Button
J3
1
Mode Switch
J4
1
IEC Header
J5
1
USER 5V
J6
1
MOMENTARY-OFF-ON
SW1
11
IN645
D1, D2, D3, D4, D5, D6, D7, D8 +3
2
22uf
C1, C3
1
0.01
C2
2
0.1uf
C4, C5
1
47K
R1
1
270ohm
R2
1
100ohm
R3
1
4K7
RN1
1
1K
RN2

CBM-II-Fastbus design files

The KiCad project lives in the sjgray/CBM-II-Fastbus repository on GitHub; these links point at the commit this page was built from.

CBM-II-Fastbus: common questions

How big is the CBM-II-Fastbus PCB?

The CBM-II-Fastbus measures 77.3 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the CBM-II-Fastbus?

33 components, from 20 distinct parts. The full bill of materials is listed on this page.

Where can I download the CBM-II-Fastbus design files?

From the sjgray/CBM-II-Fastbus repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the CBM-II-Fastbus design in my own project?

The repository has no license, so all rights stay with sjgray. Use it as a reference, and ask the author before reusing the design.