Simple stm32 tssop20
SL-RU·dev_boards·simple_stm32_tssop20/simple_stm32_tssop20.kicad_pcb
About the Simple stm32 tssop20 PCB
Simple stm32 tssop20 is an open source STM32 PCB design by SL-RU, published on GitHub. It is a 2-layer board measuring 22.8 × 23.9 mm, with 16 components from 13 distinct parts.
Its main chip is the STM32F030F4Px, from the STM32 family. By type, the board carries 6 capacitors, 5 connectors, 1 IC, 1 crystal, 1 switch and 1 diode.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Some circuits for MCU and other ICs
Main components on the Simple stm32 tssop20
Simple stm32 tssop20 bill of materials (BOM)
16 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F030F4Px | TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 1 | Crystal | Crystal_HC49-U_Vertical | Y1 |
| 1 | CONN_01X10 | Socket_Strip_Straight_1x10 | P1 |
| 1 | CONN_01X03 | Socket_Strip_Straight_1x03 | P2 |
| 1 | USART | Socket_Strip_Straight_1x02 | P3 |
| 1 | SWDIO | Socket_Strip_Straight_1x03 | P4 |
| 1 | CONN_01X09 | Socket_Strip_Straight_1x09 | P5 |
| 1 | SW_PUSH | SW_PUSH_SMALL | SW1 |
| 1 | LED | LED-3MM | D1 |
| 2 | 22nF | C_0805_HandSoldering | C1, C2 |
| 3 | 100nF | C_0402 | C3, C5, C6 |
| 1 | 1nF | C_0402 | C4 |
| 1 | 330 | R_0603_HandSoldering | R1 |
Simple stm32 tssop20 design files
The KiCad project lives in the SL-RU/dev_boards repository on GitHub; these links point at the commit this page was built from.
Simple stm32 tssop20: common questions
What microcontroller does the Simple stm32 tssop20 use?
The Simple stm32 tssop20 is built around the STM32F030F4Px, from the STM32 family.
How big is the Simple stm32 tssop20 PCB?
The Simple stm32 tssop20 measures 22.8 × 23.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple stm32 tssop20?
16 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple stm32 tssop20 design files?
From the SL-RU/dev_boards repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Simple stm32 tssop20 design in my own project?
The repository has no license, so all rights stay with SL-RU. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Simple stm32 tssop20 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in dev_boards
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k