I2c multi
Sluggcat·Stage_TerraForma·PCB/Backplane review/I2c_multi.kicad_pcb
About the I2c multi PCB
I2c multi is an open source PCB design by Sluggcat, published on GitHub. It is a 2-layer board measuring 51.8 × 51.8 mm, with 31 components from 11 distinct parts.
Other key parts include the LD1117S33TR_SOT223, SIP32411DR-T1-GE3 and PCA9540BDP. By type, the board carries 10 capacitors, 9 connectors, 6 ICs and 6 resistors.
Main components on the I2c multi
I2c multi bill of materials (BOM)
31 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U1 |
| 4 | SIP32411DR-T1-GE3 | SC_DR-T1-GE3_VIS | U2, U3, U4, U5 |
| 1 | PCA9540BDP AT24CS64-XHM | TSSOP-8_4.4x3mm_P0.65mm | U6 |
| 4 | Conn_01x05_Socket | PinSocket_1x05_P2.54mm_Vertical | J1_EZO_DO1, J2_EZO_Ph1, J3_EZO_ORP1, J4_EZO_CO1 |
| 4 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J5_Feather1, J5_Feather2, J7_Temp1, J8_Pres1 |
| 1 | Conn_01x02_Pin | PinSocket_1x02_P2.54mm_Vertical | J6_PWR1 |
| 4 | 4,7u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4 |
| 4 | 0,1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6, C7, C8 |
| 1 | 10U 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 100N 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10 |
| 6 | 4,7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6 |
I2c multi design files
The KiCad project lives in the Sluggcat/Stage_TerraForma repository on GitHub; these links point at the commit this page was built from.
I2c multi: common questions
How big is the I2c multi PCB?
The I2c multi measures 51.8 × 51.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I2c multi?
31 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the I2c multi design files?
From the Sluggcat/Stage_TerraForma repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the I2c multi design in my own project?
The repository has no license, so all rights stay with Sluggcat. Use it as a reference, and ask the author before reusing the design.