Adafruit RFM+LoRa Breakout
Sluggcat·Stage_TerraForma·PCB/LoRa_Breakout/Adafruit RFM+LoRa Breakout.kicad_pcb
About the Adafruit RFM+LoRa Breakout
Adafruit RFM+LoRa Breakout is an open source PCB design by Sluggcat, published on GitHub. It is a 2-layer board measuring 25.4 × 29.2 mm, with 16 components from 13 distinct parts.
Other key parts include the LD1117S33TR_SOT223 and SIP32411DR-T1-GE3. By type, the board carries 6 ICs, 3 jumpers, 3 capacitors, 3 resistors and 1 crystal.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
Main components on the Adafruit RFM+LoRa Breakout
Adafruit RFM+LoRa Breakout bill of materials (BOM)
16 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33TR_SOT223 RFM69HCW | RFMHCW_SMT | U1 |
| 1 | SIP32411DR-T1-GE3 74HC4050D | TSSOP16 | U2 |
| 1 | SIP32411DR-T1-GE3 AP2112K-3.3 | SOT23-5 | U3 |
| 1 | — | ADAFRUIT_3.5MM | U$8 |
| 1 | — | PCBFEAT-REV-040 | U$14 |
| 1 | — | ADAFRUIT_TEXT_20MM | U$19 |
| 1 | uFL/SMA | SMA_EDGELAUNCH_UFL | X1 |
| 1 | — | 1X05_ROUND_70 | JP1 |
| 1 | — | 1X01_ROUND | JP2 |
| 1 | — | 1X09_ROUND_70 | JP3 |
| 2 | 10uF | 0805-NO | C1, C3 |
| 1 | 0.1uF | 0805-NO | C2 |
| 3 | 100K | 0805-NO | R1, R2, R3 |
Adafruit RFM+LoRa Breakout design files
The KiCad project lives in the Sluggcat/Stage_TerraForma repository on GitHub; these links point at the commit this page was built from.
Adafruit RFM+LoRa Breakout: common questions
How big is the Adafruit RFM+LoRa Breakout?
The Adafruit RFM+LoRa Breakout measures 25.4 × 29.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit RFM+LoRa Breakout?
16 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Adafruit RFM+LoRa Breakout design files?
From the Sluggcat/Stage_TerraForma repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Adafruit RFM+LoRa Breakout design in my own project?
The repository has no license, so all rights stay with Sluggcat. Use it as a reference, and ask the author before reusing the design.
More boards in Stage_TerraForma
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979