SmallKatMotherboard
SmallKatMQP·SmallKatMotherboard
About the SmallKatMotherboard PCB
SmallKatMotherboard is an open source STM32 PCB design by SmallKatMQP, published on GitHub. It is a 4-layer board measuring 75 × 65 mm, with 49 components from 19 distinct parts.
Its main chip is the STM32H743VITx, from the STM32 family. Other key parts include the TPS562201DDCR. By type, the board carries 15 capacitors, 13 connectors, 12 resistors, 3 diodes, 2 ICs and 2 crystals.
Main components on the SmallKatMotherboard
SmallKatMotherboard bill of materials (BOM)
49 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS562201DDCR | SOT95P280X110-6N | IC2 |
| 1 | STM32H743VITx | LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | 32.768khz | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 32MHZ | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 8 | Conn_01x06_Male | Molex_CLIK-Mate_502443-0670_1x06-1MP_P2.00mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J16 |
| 1 | PRT-10474 | XT60 | J8 |
| 4 | Conn_01x04_Male | Molex_CLIK-Mate_502443-0470_1x04-1MP_P2.00mm_Vertical | J9, J10, J14, J15 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 1 | Ferrite_Bead | L_0805_2012Metric | FB1 |
| 1 | 4.7UH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2 |
| 7 | 0.1UF | C_0402_1005Metric | C1, C17, C18, C19, C20, C21, C22 |
| 4 | 10PF | C_0402_1005Metric | C2, C3, C4, C5 |
| 2 | 22UF | C_0805_2012Metric | C12, C13 |
| 1 | 10UF | C_0805_2012Metric | C14 |
| 1 | 0.1UF | C_0805_2012Metric | C16 |
| 4 | 10k | R_0402_1005Metric | R1, R5, R6, R10 |
| 3 | 330R | R_0402_1005Metric | R2, R3, R4 |
| 1 | 33.2k | R_0402_1005Metric | R7 |
| 4 | 33R | R_0402_1005Metric | R8, R9, R11, R12 |
SmallKatMotherboard design files
The KiCad project lives in the SmallKatMQP/SmallKatMotherboard repository on GitHub; these links point at the commit this page was built from.
SmallKatMotherboard: common questions
What microcontroller does the SmallKatMotherboard use?
The SmallKatMotherboard is built around the STM32H743VITx, from the STM32 family.
How big is the SmallKatMotherboard PCB?
The SmallKatMotherboard measures 75 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SmallKatMotherboard?
49 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the SmallKatMotherboard design files?
From the SmallKatMQP/SmallKatMotherboard repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SmallKatMotherboard design in my own project?
The repository has no license, so all rights stay with SmallKatMQP. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SmallKatMotherboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k