10 open source boards using the TPS562201DDCR

Real designs built with the TPS562201DDCR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the TPS562201DDCR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPS562201DDCR connects to, and the resistors, capacitors and other passives placed on it.

  • The VIN pin has a decoupling capacitor on 9 of 9 designs, most often 10 µF (then 100 nF).
  • The SW pin has a inductor on 8 of 9 designs, most often 3.3 µH (then 4.7 µH).
  • The SW pin has a series capacitor on 8 of 9 designs, most often 100 nF.
  • The VFB pin has a resistor to GND on 8 of 9 designs, most often 10 kΩ.
GNDpin 1Connected to: GND 100%
SWpin 2Connected to: Signal 89%
  • Inductor on 89% · 3.3 µH (3), 4.7 µH (1), 2.2 µH (1)
  • Series capacitor on 89% · 100 nF (7)
VINpin 3Connected to: VIN 67% · a signal 33%
  • Decoupling capacitor on 100% · 10 µF (9), 100 nF (3), 47 µF (2)
VFBpin 4Connected to: Signal 100%
  • Resistor to GND on 89% · 10 kΩ (7)
  • Pull-up to 3.3V on 89% · 33.2 kΩ (3), 33 kΩ (2), 54.9 kΩ (1)
ENpin 5Connected to: Signal 67% · 1.8V 33%
  • Series resistor on 33% · 0 Ω (2), 10 kΩ (2), 56 kΩ (1)
  • Pull-up to VIN on 33% · 100 kΩ (1), 10 kΩ (1)
VBSTpin 6Connected to: Signal 100%
  • Series capacitor on 78% · 100 nF (6)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Mynd Main by teufelaudio, FaradayRF-Hardware by FaradayRF, Aether by nasheed-x and R2RDAC2026 REVIZE II by ERDALECE.

The TPS562201DDCR in open source designs

The gallery holds 10 open source boards using the TPS562201DDCR from 10 GitHub repositories; a typical one measures about 75 × 65 mm and carries around 103 components.

67% use four copper layers or more, and 40% carry an open source license.

The most starred is Mynd Main by teufelaudio.

Microcontrollers on boards using the TPS562201DDCR

TPS562201DDCR: common questions

Where can I find a TPS562201DDCR reference design?

Each of the 10 boards on this page is a real design using the TPS562201DDCR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TPS562201DDCR VIN pin?

The VIN pin has a decoupling capacitor on 9 of 9 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 9 open source designs using the TPS562201DDCR.

How is the TPS562201DDCR SW pin connected?

The SW pin has a inductor on 8 of 9 designs, most often 3.3 µH (then 4.7 µH). Counted from the KiCad layouts of 9 open source designs using the TPS562201DDCR.

What resistor goes on the TPS562201DDCR VFB pin?

The VFB pin has a resistor to GND on 8 of 9 designs, most often 10 kΩ. Counted from the KiCad layouts of 9 open source designs using the TPS562201DDCR.

What parts are used alongside the TPS562201DDCR?

The BQ25713RSNR, ESP32-S3-WROOM-1, FT24C512A-TSR-T, INA181A1IDBVR and LM51231QRGRRQ1 appear in the most repositories here.

Which microcontrollers do boards using the TPS562201DDCR use?

Most are built on STM32 (5) and ESP32 (4).

How big is a typical board using the TPS562201DDCR?

The median is 75 × 65 mm, and 33% are two-layer designs.

What is the most popular open source board using the TPS562201DDCR?

By GitHub stars, Mynd Main by teufelaudio, with 76 stars.

Can I simulate one of these boards using the TPS562201DDCR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part