RPi zero with ethernet
About the RPi zero with ethernet PCB
RPi zero with ethernet is an open source PCB design by Smoothieware, published on GitHub. It is a 2-layer board measuring 65.6 × 49.5 mm, with 38 components from 22 distinct parts.
Other key parts include the R-78HB5.0-0.5L and ENC28J60-I/ML. By type, the board carries 13 capacitors, 9 resistors, 6 connectors, 4 diodes, 2 ICs and 2 transistors.
From the project
Hardware files for the Smoothieboard v2, and extension boards
Main components on the RPi zero with ethernet
RPi zero with ethernet bill of materials (BOM)
38 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R-78HB5.0-0.5L | R-78HBx.x-x.xL | U1 |
| 1 | ENC28J60-I/ML | QFN-28-1EP_6x6mm_Pitch0.65mm | U2 |
| 2 | BSS214N | SOT-23 | Q1, Q2 |
| 1 | 25MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | HR911105A | HR911105A | CON1 |
| 1 | CONN_01X02 | FCI_20020110-C021A01LF | P1 |
| 2 | CONN_01X20 | Pin_Header_Straight_1x20_Pitch2.54mm | P2, P5 |
| 1 | CONN_02X20 | Pin_Header_Straight_2x20_Pitch2.54mm | P3 |
| 1 | CONN_02X05 | SHF-105-01-L-D-SM-LC | P4 |
| 2 | MBRA210LT3G | SMA_Standard | D1, D2 |
| 1 | HTX | D_0805 | D3 |
| 1 | HRX | D_0805 | D4 |
| 1 | MPZ1608S300A | R_0603 | L1 |
| 1 | 3.3uF/100V | C_1206 | C1 |
| 1 | 10uF | C_0603 | C2 |
| 2 | 18pF | C_0603 | C3, C4 |
| 1 | 1uF | C_0603 | C5 |
| 7 | 0.1uF | C_0603 | C6, C7, C8, C9, C11, C12, C13 |
| 1 | 10uF lowesr | C_0603 | C10 |
| 1 | 2k32 1% | R_0603 | R1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 220R | R_0603 | R2, R3, R8, R9 |
| 4 | 49R9 | R_0603 | R4, R5, R6, R7 |
RPi zero with ethernet design files
The KiCad project lives in the Smoothieware/Smoothieboard2 repository on GitHub; these links point at the commit this page was built from.
RPi zero with ethernet: common questions
How big is the RPi zero with ethernet PCB?
The RPi zero with ethernet measures 65.6 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RPi zero with ethernet?
38 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RPi zero with ethernet design files?
From the Smoothieware/Smoothieboard2 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the RPi zero with ethernet design in my own project?
The repository has no license, so all rights stay with Smoothieware. Use it as a reference, and ask the author before reusing the design.
More boards in Smoothieboard2
STM32Smoothiev2-prime
110 × 110 mm409 parts4LNo license69
STM32Smoothiev2-prime-2660
110 × 110 mm405 parts4LNo license69
STM32V2 Core
90 × 110 mm326 parts4LNo license69
Motordriver
133 × 58 mm93 parts4LNo license69
Unidirectional level shifter
64.6 × 29.8 mm61 parts2LNo license69
StepperMotorBreakout
90 × 90 mm48 parts4LNo license69
Large MOSFET
36 × 31 mm40 partsNo license69
SPIOpto
50.8 × 80 mm32 parts2LNo license69
C.H.I.P-DIP
40.9 × 60.2 mm21 parts2LNo license69
Rpi zero
65.6 × 30 mm17 parts2LNo license69
SBV2-EB: SPI PT100
50 × 30 mm13 parts2LNo license69