Small paintbrush hotswap
snu88lez·thepaintbrush·hardware/v4/small-paintbrush-hotswap.kicad_pcb
About the Small paintbrush hotswap PCB
Small paintbrush hotswap is an open source AVR/Arduino PCB design by snu88lez, published on GitHub. It is a 2-layer board measuring 94 × 50 mm, with 17 components from 6 distinct parts.
Its main chip is the ProMicro, from the AVR/Arduino family. By type, the board carries 3 connectors, 2 ICs and 2 switches.
It belongs with the keyboards designs in this gallery.
From the project
This is the fourth hardware design of the Paintbrush mini keyboard. This version removes the 'leg' from version 3 and moves the secondary features (switch/reset button) to a more user friendly location at the top of the board.
This is the fourth hardware design of the Paintbrush mini keyboard. This version removes the 'leg' from version 3 and moves the secondary features (switch/reset button) to a more user friendly location at the top of the board.
Please see the following sections for details about this hardware version.
- Reversable PCB - Can be built left OR right handed - Pro Micro compatible MCU foot print - Kalih Choc v1 mechanical switches - Soldered directly OR using kalih hot swap sockets - OLED support (optional) - Slide switch that can be used as a power switch (optional) - Reset button (optional) -…

Main components on the Small paintbrush hotswap
Small paintbrush hotswap bill of materials (BOM)
17 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ProMicro | ArduinoProMicro | U1, U2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 2 | Conn_01x04 | OLED | J2, J3 |
| 8 | SW_Push | Kailh_socket_PG1350_optional_reversible | KEY1, KEY2, KEY3, KEY4, KEY5, KEY6, KEY7, KEY8 |
| 2 | SW_Push | SW_SPST_B3U-1000P | PUSH1, PUSH2 |
| 2 | SW_SPDT | SW_SPDT_PCM12 | SW1, SW2 |
Small paintbrush hotswap design files
The KiCad project lives in the snu88lez/thepaintbrush repository on GitHub; these links point at the commit this page was built from.
Small paintbrush hotswap: common questions
What microcontroller does the Small paintbrush hotswap use?
The Small paintbrush hotswap is built around the ProMicro, from the AVR/Arduino family.
How big is the Small paintbrush hotswap PCB?
The Small paintbrush hotswap measures 94 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Small paintbrush hotswap?
17 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Small paintbrush hotswap design files?
From the snu88lez/thepaintbrush repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Small paintbrush hotswap design in my own project?
The repository has no license, so all rights stay with snu88lez. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Small paintbrush hotswap without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in thepaintbrush
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k