Memristor emulator
sofia-kirilov·memristor_emulator
About the Memristor emulator PCB
Memristor emulator is an open source PCB design by sofia-kirilov, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 33 components from 20 distinct parts.
Other key parts include the TL082 and AD633JN. By type, the board carries 9 capacitors, 8 resistors, 6 test points, 3 ICs, 3 connectors and 3 diodes.
It belongs with the test & measurement designs in this gallery.
From the project
An analog circuit that behaves like a memristor. Its conductance depends on the history of the voltage applied across it, so its current-voltage curve forms a pinched hysteresis loop.
An analog circuit that behaves like a memristor. Its conductance depends on the history of the voltage applied across it, so its current-voltage curve forms a pinched hysteresis loop.
Built around an AD633 analog multiplier and TL082 op-amps. Designed in KiCad, simulated in LTspice, measured on an FNIRSI 1014D oscilloscope.
A memristor relates charge and flux. This emulator is flux-controlled: its conductance is set by the integral of the voltage across it.
Main components on the Memristor emulator
Memristor emulator bill of materials (BOM)
33 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL082 | DIP-8_W7.62mm_Socket | U1, U3 |
| 1 | AD633JN | DIP-8_W7.62mm_Socket | U2 |
| 1 | SIG IN | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | PWR +12/GND/-12 | TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2 |
| 1 | SCOPE OUT | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | 50K 50k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | VIN | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | PHI | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | VW | TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | ISENSE | TestPoint_Loop_D2.50mm_Drill1.0mm | TP4 |
| 2 | GND | TestPoint_Loop_D2.50mm_Drill1.0mm | TP5, TP6 |
| 1 | Red 3mm | LED_D3.0mm | D1 |
| 2 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D2, D3 |
| 1 | 100nF film | C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C1 |
| 6 | 100NF 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6, C7 |
| 2 | 10uF 25V | CP_Radial_D5.0mm_P2.00mm | C8, C9 |
| 2 | 4.7K 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R8 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 1k (Rs) | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 4 | 10k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R6, R7 |
Memristor emulator design files
The KiCad project lives in the sofia-kirilov/memristor_emulator repository on GitHub; these links point at the commit this page was built from.
- Layoutmemristor_emulator.kicad_pcb
- Schematicmemristor_emulator.kicad_sch
- BOMBOM.csv
Memristor emulator: common questions
How big is the Memristor emulator PCB?
The Memristor emulator measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Memristor emulator?
33 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Memristor emulator design files?
From the sofia-kirilov/memristor_emulator repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Memristor emulator design in my own project?
The repository has no license, so all rights stay with sofia-kirilov. Use it as a reference, and ask the author before reusing the design.
Similar boards
AnalyzerBoxPCB fork
gusmanb
52.7 × 47.9 mm54 parts4LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kEleLab v2 Frontpanel a
Chrismettal
88 × 25 mm23 parts2LGPL-3.0528EleLab v2 Bus150
Chrismettal
150 × 50 mm37 parts2LGPL-3.0528EleLab v2 PowerFeed
Chrismettal
68 × 50 mm11 parts2LGPL-3.0528