V1

sofL-U4T·Macropad-PCB·V1/KiCad/V1.kicad_pcb

V1 PCB layout, top view — open source AVR/Arduino board by sofL-U4T

About the V1 PCB

V1 is an open source AVR/Arduino PCB design by sofL-U4T, published on GitHub. It is a 2-layer board measuring 76.2 × 84.1 mm, with 42 components from 17 distinct parts.

Its main chip is the C138714, from the AVR/Arduino family. By type, the board carries 12 LEDs, 12 diodes, 7 capacitors, 6 resistors, 1 IC and 1 crystal.

It belongs with the keyboards designs in this gallery.

From the project

PCB designed to fit a 4 x 3 macropad

I have started designing and possiblytm manufacturing a macropad. This is a sideproject so don't expect much please.

I don't really know what I'm doing, I started learning kicad this month This will never be sold probably

V1, from the project README
From the project README

Main components on the V1

V1 bill of materials (BOM)

42 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C138714
ATmega32U4-AU
Texas Instruments
U1
1
16MHz
Y1
1
C135342
500mA
Shenzhen JDT Fuse
F1
1
SW_Push
SW1
1
HRO-TYPE-C-31-M-12
USB1
12
MX-NoLED
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +4
1
C123799
SOD-123
Microdiode Electronics
D1
11
SOD-123
D2, D3, D4, D5, D6, D7, D8, D9 +3
2
22pF
C1, C2
1
1uF
C3
3
0.1 uF
C4, C5, C6
1
10 uF
C7
1
5.1K
10k
R1
1
5.1K
22
R2
1
22
R3
1
10k
R4
2
5.1k
R5, R6

V1 design files

The KiCad project lives in the sofL-U4T/Macropad-PCB repository on GitHub; these links point at the commit this page was built from.

V1: common questions

What microcontroller does the V1 use?

The V1 is built around the C138714, from the AVR/Arduino family.

How big is the V1 PCB?

The V1 measures 76.2 × 84.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the V1?

42 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the V1 design files?

From the sofL-U4T/Macropad-PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the V1 design in my own project?

The repository has no license, so all rights stay with sofL-U4T. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the V1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Macropad-PCB

Similar boards