V1.1
sofL-U4T·Macropad-PCB·V1.1/KiCad/V1.1.kicad_pcb
About the V1.1 PCB
V1.1 is an open source AVR/Arduino PCB design by sofL-U4T, published on GitHub. It is a 2-layer board measuring 76.2 × 80.2 mm, with 43 components from 16 distinct parts.
Its main chip is the C138714, from the AVR/Arduino family. Other key parts include the SRV05-4. By type, the board carries 12 LEDs, 12 diodes, 7 capacitors, 6 resistors, 2 ICs and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
PCB designed to fit a 4 x 3 macropad
I have started designing and possiblytm manufacturing a macropad. This is a sideproject so don't expect much please.
I don't really know what I'm doing, I started learning kicad this month This will never be sold probably

Main components on the V1.1
V1.1 bill of materials (BOM)
43 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C138714 ATmega32U4-AU Texas Instruments | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | SRV05-4 | SOT-23-6 | U2 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C135342 500mA Shenzhen JDT Fuse | Fuse_1206_3216Metric | F1 |
| 1 | SW_Push | SKQG-1155865 | SW1 |
| 1 | HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 12 | MX-NoLED | MXOnly-1U-NoLED | MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +4 |
| 1 | C123799 SOD-123 Microdiode Electronics | D_SOD-123 | D1 |
| 11 | SOD-123 | D_SOD-123 | D2, D3, D4, D5, D6, D7, D8, D9 +3 |
| 2 | 22pF | C_0805_2012Metric | C1, C2 |
| 1 | 1 uF | C_0805_2012Metric | C3 |
| 3 | 0.1uF | C_0805_2012Metric | C4, C5, C6 |
| 1 | 10 uF | C_0805_2012Metric | C7 |
| 2 | 5.1K 5.1k | R_0805_2012Metric | R1, R2 |
| 2 | 10k | R_0805_2012Metric | R3, R6 |
| 2 | 22 | R_0805_2012Metric | R4, R5 |
V1.1 design files
The KiCad project lives in the sofL-U4T/Macropad-PCB repository on GitHub; these links point at the commit this page was built from.
V1.1: common questions
What microcontroller does the V1.1 use?
The V1.1 is built around the C138714, from the AVR/Arduino family.
How big is the V1.1 PCB?
The V1.1 measures 76.2 × 80.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the V1.1?
43 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the V1.1 design files?
From the sofL-U4T/Macropad-PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the V1.1 design in my own project?
The repository has no license, so all rights stay with sofL-U4T. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the V1.1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Macropad-PCB
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k