HardLabs

Joystick 2-axis with pushbutton breakout

SolderedElectronics·Joystick-2-axis-with-pushbutton-breakout-hardware-design·CAD/V1.3.0/Joystick 2-axis with pushbutton breakout.kicad_pcb

Joystick 2-axis with pushbutton breakout layout, top view — open source board by SolderedElectronics
Simulate this board

About the Joystick 2-axis with pushbutton breakout

Joystick 2-axis with pushbutton breakout is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 7 components from 4 distinct parts.

By type, the board carries 2 relays and 1 resistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Joystick-2-axis-with-pushbutton-breakout designed by Soldered Electronics.

Joystick module is well known to all – it is identical to the one found in the PlayStation2 joystick. Whether you are making a game with a microcontroller or want more freedom while navigating a joystick module will come handy.

It reads X and Y position of the joystick knob (used for controlling) and whether the joystick is being pressed down. X and Y values are shown in the form of analog values while reading off if the joystick is pressed or not is shown in the form of digital value (HIGH/LOW; it has pull-up resistor).

Joystick 2-axis with pushbutton breakout, from the project README
From the project README

Joystick 2-axis with pushbutton breakout bill of materials (BOM)

7 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
HOLE_3.2mm
H1, H2, H3, H4
1
Joystick GGL002
K1
1
HEADER_MALE_5X1
K2
1
10k
R1

Joystick 2-axis with pushbutton breakout design files

The KiCad project lives in the SolderedElectronics/Joystick-2-axis-with-pushbutton-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

Joystick 2-axis with pushbutton breakout: common questions

How big is the Joystick 2-axis with pushbutton breakout?

The Joystick 2-axis with pushbutton breakout measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Joystick 2-axis with pushbutton breakout?

7 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Joystick 2-axis with pushbutton breakout design files?

From the SolderedElectronics/Joystick-2-axis-with-pushbutton-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Joystick 2-axis with pushbutton breakout design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

More boards in Joystick-2-axis-with-pushbutton-breakout-hardware-design

Similar boards