PCB-breadboard protoboard hardware design
About the PCB-breadboard protoboard hardware design
PCB-breadboard protoboard hardware design is an open source PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 84 × 54 mm, with 83 components from 2 distinct parts.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Hardware design, BOM, gerbers and 3D files for PCB-breadboard-protoboard designed by Soldered Electronics.
This PCB is also a protoboard. It offers both the simplicity and the functionality of a breadboard. It is the same size as the modular half-size breadboard and has the same connections to pins. The board allows you to make the temporary circuit from the breadboard permanent.
This repository contains all design files for PCB breadboard/protoboard, organized as follows:
PCB-breadboard protoboard hardware design bill of materials (BOM)
83 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3 |
| 80 | HEADER_MALE_5X1 | HEADER_MALE_5X1 | K1, K2, K3, K4, K5, K6, K7, K8 +72 |
PCB-breadboard protoboard hardware design design files
The KiCad project lives in the SolderedElectronics/PCB-breadboard-protoboard-hardware-design repository on GitHub; these links point at the commit this page was built from.
PCB-breadboard protoboard hardware design: common questions
How big is the PCB-breadboard protoboard hardware design?
The PCB-breadboard protoboard hardware design measures 84 × 54 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCB-breadboard protoboard hardware design?
83 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCB-breadboard protoboard hardware design design files?
From the SolderedElectronics/PCB-breadboard-protoboard-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PCB-breadboard protoboard hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Similar boards
Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446
ESP32
66.4 × 48.1 mm20 parts2LCC-BY-SA-4.0446