Reaction game-Solder kit hardware design

SolderedElectronics·Reaction-game-Solder-kit-hardware-design·CAD/V1.0.0/Reaction game.kicad_pcb

Reaction game-Solder kit hardware design PCB layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Reaction game-Solder kit hardware design PCB

Reaction game-Solder kit hardware design is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 50 × 50 mm, with 18 components from 15 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. By type, the board carries 5 switches, 4 diodes, 4 resistors, 2 relays, 1 IC and 1 capacitor.

From the project

Hardware design, BOM, gerbers and 3D files for Reaction-game-Solder-kit designed by Soldered Electronics.

If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this set is a great opportunity. Reaction game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The goal of the game is to press the button next to the LED as soon as it turns on. With every correct answer, the game gets a bit harder – the time you have to press the button shortens. How many correct answers can you get?

Reaction game-Solder kit hardware design, from the project README
From the project README

Main components on the Reaction game-Solder kit hardware design

Reaction game-Solder kit hardware design bill of materials (BOM)

18 components, 15 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY404-SSNR
U1
1
HOLE_5MM
HOLE_5mm
H1
1
HEADER_MALE_3X1
K1
1
CR2032_HOLDER
K2
1
SS-12D02-VG4
S1
1
12MM_PUSHBUTTON_RED
S2
1
12MM_PUSBUTTON_YELLOW
S3
1
12MM_PUSHBUTTON_BLUE
S4
1
12MM_PUSHBUTTON_GREEN
S5
1
THT_LED_5MM_BLUE
D1
1
THT_LED_5MM_YELLOW
D2
1
THT_LED_5MMRED
THT_LED_5mmRED
D3
1
THT_LED_5MM_GREEN
D4
1
100NF
100nF
C1
4
330R
R1, R2, R3, R4

Reaction game-Solder kit hardware design design files

The KiCad project lives in the SolderedElectronics/Reaction-game-Solder-kit-hardware-design repository on GitHub; these links point at the commit this page was built from.

Reaction game-Solder kit hardware design: common questions

What microcontroller does the Reaction game-Solder kit hardware design use?

The Reaction game-Solder kit hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Reaction game-Solder kit hardware design PCB?

The Reaction game-Solder kit hardware design measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Reaction game-Solder kit hardware design?

18 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Reaction game-Solder kit hardware design design files?

From the SolderedElectronics/Reaction-game-Solder-kit-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Reaction game-Solder kit hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Reaction game-Solder kit hardware design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards