85 open source boards using the ATTINY404-SSNR
Real designs built with the ATTINY404-SSNR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
CO-sensor-MQ7-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.01AVR/Arduino
Ozone sensor-MQ131-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.01AVR/Arduino
Benzene--Toluene--Acetone--Formaldehyde sensor-MQ138-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.01AVR/Arduino
Natural gas--LPG-sensor-MQ5-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.01AVR/Arduino
Load cell ampfilier-HX711-board with easy-C-hardware design
SolderedElectronics
38 × 22 mm25 parts2LTAPR-OHL-1.01AVR/Arduino
Slider potentiometer breakout qwiic hardware design
SolderedElectronics
86 × 22 mm15 parts2LTAPR-OHL-1.01AVR/Arduino
Slider potentiometer breakout with easyC-hardware design
SolderedElectronics
86 × 22 mm15 parts2LTAPR-OHL-1.01AVR/Arduino
Hall effect sensor easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.01AVR/Arduino
Hall effect sensor easyC
SolderedElectronics
22 × 22 mm12 parts2LTAPR-OHL-1.01AVR/Arduino
Soldered-4CH-relay board easyC-hardware design
test-gh-syncer2
70 × 54 mm60 parts2LTAPR-OHL-1.00AVR/Arduino
2-channel relay board with easyC
SolderedElectronics
70 × 38 mm42 parts2LTAPR-OHL-1.00AVR/Arduino
2-channel relay board with easyC
SolderedElectronics
70 × 38 mm42 parts2LTAPR-OHL-1.00AVR/Arduino
Soldered-2-channel relay board with easyC-hardware design
test-gh-syncer2
38 × 70 mm41 parts2LTAPR-OHL-1.00AVR/Arduino
Soldered-1-channel relay board with easyC-hardware design
test-gh-syncer2
22 × 70 mm31 parts2LTAPR-OHL-1.00AVR/Arduino
1-channel relay board qwiic hardware design
SolderedElectronics
70 × 22 mm31 parts2LTAPR-OHL-1.00AVR/Arduino
1-channel relay board with easyC-hardware design
SolderedElectronics
70 × 22 mm31 parts2LTAPR-OHL-1.00AVR/Arduino
Hydrogen sensor-MQ8-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Hydrogen sensor-MQ8-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Ammonia sensor-MQ137-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Natural gas--LPG-sensor-MQ5-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Alcohol--Ethanol sensor-MQ3-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Ozone sensor-MQ131-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Alcohol--Ethanol sensor-MQ3-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Methane--CNG-sensor-MQ4-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Ammonia sensor-MQ137-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Air quality sensor-MQ135-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
CO-sensor-MQ7-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
CO--flammable gasses sensor-MQ9-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Air quality sensor-MQ135-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Hydrogen-Sulfide sensor-MQ136-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
LPG--Butane sensor-MQ6-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
LPG--Butane sensor-MQ6-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
CO--flammable gasses sensor-MQ9-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Butane--LPG---Smoke sensor-MQ2-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Methane--CNG-sensor-MQ4-breakout qwiic hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00AVR/Arduino
Methane--Natural gas sensor-MQ214-breakout with easyC-hardware design
SolderedElectronics
22 × 54 mm26 parts2LTAPR-OHL-1.00
How designs wire the ATTINY404-SSNR
Read from the KiCad layouts of 60 open source designs, one per repository: what each pin of the ATTINY404-SSNR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 52 of 60 designs, most often 100 nF.
- The PA1 pin is left unconnected on 53 of 53 designs.
- The PA2 pin is left unconnected on 51 of 53 designs (a signal on 2).
- The PA3 pin is left unconnected on 51 of 53 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 3.3V 88% |
|
| PA4pin 2 | Connected to: Signal 97% |
|
| PA5pin 3 | Connected to: MQ-X 42% · not connected 17% |
|
| PA6pin 4 | Connected to: Not connected 83% | — |
| PB1pin 8 | Connected to: NMOS-DUAL 42% |
|
| PB0pin 9 | Connected to: NMOS-DUAL 47% |
|
| PA1pin 11 | Connected to: Not connected 100% | — |
| PA2pin 12 | Connected to: Not connected 96% | — |
| PA3pin 13 | Connected to: Not connected 96% | — |
| GNDpin 14 | Connected to: GND 100% | — |
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Benzene--Toluene--Acetone--Formaldehyde sensor-MQ138-breakout with easyC-hardware design by SolderedElectronics, CO-sensor-MQ7-breakout with easyC-hardware design by SolderedElectronics, Hall effect sensor easyC by SolderedElectronics and Hall effect sensor easyC by SolderedElectronics.
The ATTINY404-SSNR in open source designs
The gallery holds 85 open source boards using the ATTINY404-SSNR from 60 GitHub repositories; a typical one measures about 22 × 38 mm and carries around 22 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Natural gas--LPG-sensor-MQ5-breakout with easyC-hardware design by SolderedElectronics.
Parts used alongside the ATTINY404-SSNR
Microcontrollers on boards using the ATTINY404-SSNR
What boards using the ATTINY404-SSNR are built for
ATTINY404-SSNR: common questions
Where can I find a ATTINY404-SSNR reference design?
Each of the 85 boards on this page is a real design using the ATTINY404-SSNR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ATTINY404-SSNR VDD pin?
The VDD pin has a decoupling capacitor on 52 of 60 designs, most often 100 nF. Counted from the KiCad layouts of 60 open source designs using the ATTINY404-SSNR.
How is the ATTINY404-SSNR PA1 pin connected?
The PA1 pin is left unconnected on 53 of 53 designs. Counted from the KiCad layouts of 60 open source designs using the ATTINY404-SSNR.
How is the ATTINY404-SSNR PA2 pin connected?
The PA2 pin is left unconnected on 51 of 53 designs (a signal on 2). Counted from the KiCad layouts of 60 open source designs using the ATTINY404-SSNR.
What parts are used alongside the ATTINY404-SSNR?
The TPS613222A, MQ-X, NMOS-DUAL, PC357_OPTO and HX711 appear in the most repositories here.
Which microcontrollers do boards using the ATTINY404-SSNR use?
Most are built on AVR/Arduino (85).
How big is a typical board using the ATTINY404-SSNR?
The median is 22 × 38 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATTINY404-SSNR?
By GitHub stars, Natural gas--LPG-sensor-MQ5-breakout with easyC-hardware design by SolderedElectronics, with 1 stars.
Can I simulate one of these boards using the ATTINY404-SSNR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.