Simple light sensor board with easyC

SolderedElectronics·Simple-light-sensor-board-qwiic-hardware-design·CAD/V1.1.2/Simple_sensor_easyC.kicad_pcb

Simple light sensor board with easyC layout, top view — open source AVR/Arduino board by SolderedElectronics

About the Simple light sensor board with easyC

Simple light sensor board with easyC is an open source AVR/Arduino PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 18 components from 11 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. By type, the board carries 6 relays, 4 resistors, 2 capacitors, 1 IC and 1 diode.

It belongs with the sensors designs in this gallery.

From the project

Hardware design, BOM, gerbers and 3D files for Simple-light-sensor-board-qwiic designed by Soldered Electronics.

Light is one of the most important things in the life of most living beings. This is why it is common to work with light sensors when learning about electronics. A simple light sensor has a light dependent resistor (LDR) and sensor on a breakout board for easy wiring. The simple sensor comes with easyC connectors onboard, which enables quick and easy connection with Dasduino microcontroller boards.

Simple light sensor board with easyC, from the project README
From the project README

Main components on the Simple light sensor board with easyC

Simple light sensor board with easyC bill of materials (BOM)

18 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY404-SSNR
U1
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
1
JST-SH_2PIN_1MM_C145954
JST-SH_2pin_1mm_C145954
K1
1
HEADER_MALE_2X1
K2
2
easyC-SMD
K3, K5
1
HEADER-UPDI
K4
1
DSHP03TS-S
K6
1
purple
D1
2
0.1UF
100n
C1, C2
3
10K
10k
R1, R3, R4
1
2K2
2k2
R2

Simple light sensor board with easyC design files

The KiCad project lives in the SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design repository on GitHub; these links point at the commit this page was built from.

Simple light sensor board with easyC: common questions

What microcontroller does the Simple light sensor board with easyC use?

The Simple light sensor board with easyC is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Simple light sensor board with easyC?

The Simple light sensor board with easyC measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Simple light sensor board with easyC?

18 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Simple light sensor board with easyC design files?

From the SolderedElectronics/Simple-light-sensor-board-qwiic-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Simple light sensor board with easyC design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.

Can I test firmware for the Simple light sensor board with easyC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Simple-light-sensor-board-qwiic-hardware-design

Similar boards