Soldered-Inkplate-MOTION-STM-board hardware design
SolderedElectronics·Soldered-Inkplate-MOTION-STM-board-hardware-design·CAD/V1.1.0/Soldered Inkplate MOTION STM board.kicad_pcb
About the Soldered-Inkplate-MOTION-STM-board hardware design
Soldered-Inkplate-MOTION-STM-board hardware design is an open source STM32 PCB design by SolderedElectronics, published on GitHub under the TAPR-OHL-1.0 license. It is a 4-layer board measuring 72.8 × 38 mm, with 52 components from 18 distinct parts.
Its main chip is the STM32H743ZIT6, from the STM32 family. Other key parts include the W9825G6KH-6. By type, the board carries 40 capacitors, 2 ICs, 2 crystals, 2 jumpers, 2 relays and 2 resistors.
From the project
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-MOTION-STM-board designed by Soldered Electronics.
All Soldered Electronics hardware designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), sorted by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, sorted by version. - OUTPUTS -> Compliance - Certificates and useful legal stuff.

Main components on the Soldered-Inkplate-MOTION-STM-board hardware design
Soldered-Inkplate-MOTION-STM-board hardware design bill of materials (BOM)
52 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H743ZIT6 | LQFP-144 | U1 |
| 1 | W9825G6KH-6 | TSOP-54 | U2 |
| 1 | SSM3J358R,LF | SOT-23-3 | Q1 |
| 1 | 16MHZ 16MHz | CRYSTAL_3225__4_PAD | X1 |
| 1 | 32.768KHZ 32.768kHz | CRYSTAL_3215 | X2 |
| 2 | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | SMD-JUMPER-CONNECTED_TRACE_SOLDERMASK | JP1, JP2 |
| 2 | Castellated_hole_Inkplate | Castellated_holes_Inkplate | K1, K2 |
| 1 | FCM 1608KF-601T03 | 0603L | FB1 |
| 2 | 4U7 4u7 | 0402C | C1, C2 |
| 5 | 1u | 0402C | C3, C4, C22, C34, C36 |
| 23 | 100N 100n | 0402C | C5, C6, C7, C10, C11, C12, C14, C15 +15 |
| 2 | 20P 20p | 0603C | C8, C16 |
| 2 | 7P5 7p5 | 0603C | C9, C17 |
| 2 | GRM155Z71A225KE01D | 0402C | C13, C18 |
| 2 | 10N 10n | 0402C | C32, C39 |
| 2 | 1n | 0402C | C33, C40 |
| 1 | 100 | 0603R | R1 |
| 1 | 100K 100k | 0603R | R2 |
Soldered-Inkplate-MOTION-STM-board hardware design design files
The KiCad project lives in the SolderedElectronics/Soldered-Inkplate-MOTION-STM-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Inkplate-MOTION-STM-board hardware design: common questions
What microcontroller does the Soldered-Inkplate-MOTION-STM-board hardware design use?
The Soldered-Inkplate-MOTION-STM-board hardware design is built around the STM32H743ZIT6, from the STM32 family.
How big is the Soldered-Inkplate-MOTION-STM-board hardware design?
The Soldered-Inkplate-MOTION-STM-board hardware design measures 72.8 × 38 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Inkplate-MOTION-STM-board hardware design?
52 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Inkplate-MOTION-STM-board hardware design design files?
From the SolderedElectronics/Soldered-Inkplate-MOTION-STM-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Inkplate-MOTION-STM-board hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which SolderedElectronics chose for the repository.
Can I test firmware for the Soldered-Inkplate-MOTION-STM-board hardware design without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k