4 open source boards using the W9825G6KH-6
Real designs built with the W9825G6KH-6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Wasca
hitomi2500
100 × 77.4 mm124 parts4LMIT81
STM32Healthypi 6 v5
Protocentral
120.1 × 70 mm223 parts6LCERN-OHL-P-2.02
FPGAGammapi zero
vikulin
65 × 30 mm142 parts4LSHL-2.10
FPGAAnice
hackclub
65.6 × 34 mm91 parts4LNo license2
The W9825G6KH-6 in open source designs
The gallery holds 4 open source boards using the W9825G6KH-6 from 4 GitHub repositories; a typical one measures about 82.8 × 52 mm and carries around 133 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Wasca by hitomi2500.
Parts used alongside the W9825G6KH-6
Microcontrollers on boards using the W9825G6KH-6
What boards using the W9825G6KH-6 are built for
W9825G6KH-6: common questions
Where can I find a W9825G6KH-6 reference design?
Each of the 4 boards on this page is a real design using the W9825G6KH-6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the W9825G6KH-6 use?
Most are built on FPGA (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the W9825G6KH-6?
The median is 82.8 × 52 mm, and 0% are two-layer designs.
What is the most popular open source board using the W9825G6KH-6?
By GitHub stars, Wasca by hitomi2500, with 81 stars.
Can I simulate one of these boards using the W9825G6KH-6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.