Keyboard for-PUBG
About the Keyboard for-PUBG PCB
Keyboard for-PUBG is an open source RISC-V PCB design by Solderingironspb, published on GitHub. It is a 2-layer board measuring 55 × 30 mm, with 26 components from 10 distinct parts.
Its main chip is the CH32V203F6P6, from the RISC-V family. Other key parts include the AMS1117-3.3. By type, the board carries 12 capacitors, 10 resistors, 2 ICs, 1 crystal and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
4 кнопочный контроллер для PUBG
В основном мне нужны только 2 доп. педали, чтоб удобно было играть - это быстрый присед и рация. Вот ногами и делаю жмяк-жмяк :D
Каким бы бесполезным не казался проект, мол игрульки, детские забавы - а Вы попробуйте поднять USB на данных микроконтроллерах, напишите код. Создайте печатную плату под это все. Разработайте 3D модели устройства и педалей. Это же куча времени и полезного опыта :)
Main components on the Keyboard for-PUBG
Keyboard for-PUBG bill of materials (BOM)
26 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V203F6P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U2 |
| 1 | 8MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | KEY_IN | TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal | J3 |
| 2 | 47uF | CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C1, C2 |
| 8 | 100n | C_0603_1608Metric | C3, C4, C7, C8, C9, C10, C11, C12 |
| 2 | 30pF | C_0805_2012Metric | C5, C6 |
| 7 | 10k | R_0603_1608Metric | R1, R5, R6, R7, R8, R9, R10 |
| 2 | 20 | R_0805_2012Metric | R2, R3 |
| 1 | 1.5k | R_0805_2012Metric | R4 |
Keyboard for-PUBG design files
The KiCad project lives in the Solderingironspb/Keyboard-for-PUBG repository on GitHub; these links point at the commit this page was built from.
Keyboard for-PUBG: common questions
What microcontroller does the Keyboard for-PUBG use?
The Keyboard for-PUBG is built around the CH32V203F6P6, from the RISC-V family.
How big is the Keyboard for-PUBG PCB?
The Keyboard for-PUBG measures 55 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keyboard for-PUBG?
26 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Keyboard for-PUBG design files?
From the Solderingironspb/Keyboard-for-PUBG repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Keyboard for-PUBG design in my own project?
The repository has no license, so all rights stay with Solderingironspb. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Keyboard for-PUBG without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-VWorkbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0129
RISC-VCh32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105
RISC-VFroggyswadge
81.5 × 72.2 mm92 parts2LMIT105
RISC-VKeytartouch
152.5 × 117.5 mm69 parts2LMIT105
RISC-VNorthPoleCircuit
Janky-Jingle-Crew
150 × 110 mm46 parts4LNo license62
RISC-VOsc sg90-v006
OpenServoCore
20.6 × 9.6 mm26 parts4LApache-2.034