HardLabs

ArduinoBreakoutboardControl

SoonerRobotics·MercuryEE2019-2020·Arduino Breakout Board/ArduinoBreakoutboardControl.kicad_pcb

ArduinoBreakoutboardControl PCB layout, top view — open source AVR/Arduino board by SoonerRobotics

About the ArduinoBreakoutboardControl PCB

ArduinoBreakoutboardControl is an open source AVR/Arduino PCB design by SoonerRobotics, published on GitHub. It is a 2-layer board measuring 66.7 × 86.7 mm, with 9 components from 6 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the BNO-555. By type, the board carries 7 connectors and 2 ICs.

Main components on the ArduinoBreakoutboardControl

Arduino_Nano_v3.xBNO-555

ArduinoBreakoutboardControl bill of materials (BOM)

9 components, 6 distinct parts.

QtyPartRefs
1
Arduino_Nano_v3.x
U1
1
BNO-555
U2
2
Conn_01x04_Male
J1, J2
1
Conn_01x06_Male
J3
2
Conn_01x02_Male
J4, J5
2
Conn_01x03
J6, J7

ArduinoBreakoutboardControl design files

The KiCad project lives in the SoonerRobotics/MercuryEE2019-2020 repository on GitHub; these links point at the commit this page was built from.

ArduinoBreakoutboardControl: common questions

What microcontroller does the ArduinoBreakoutboardControl use?

The ArduinoBreakoutboardControl is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the ArduinoBreakoutboardControl PCB?

The ArduinoBreakoutboardControl measures 66.7 × 86.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArduinoBreakoutboardControl?

9 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArduinoBreakoutboardControl design files?

From the SoonerRobotics/MercuryEE2019-2020 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ArduinoBreakoutboardControl design in my own project?

The repository has no license, so all rights stay with SoonerRobotics. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ArduinoBreakoutboardControl without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in MercuryEE2019-2020

Similar boards