6k keypad
souffle17·6k-keypad
About the 6k keypad PCB
6k keypad is an open source AVR/Arduino PCB design by souffle17, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 72.4 × 83.1 mm, with 32 components from 16 distinct parts.
Its main chip is the ATmega32U4-A, from the AVR/Arduino family. By type, the board carries 7 diodes, 7 capacitors, 6 relays, 6 resistors, 1 IC and 1 crystal.
From the project
a simple 6k keypad
A simple 2x3 mechanical keypad pcb and case. Custom firmware and functionality can be found here
Case parts are designed for either 3D printing or CNC machining, stacked and screwed together.
Main components on the 6k keypad
6k keypad bill of materials (BOM)
32 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-A | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | XTAL | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AVR-ISP-6 | Reset_Pretty-Mask | J1 |
| 1 | 500m | Fuse_1206_3216Metric | F1 |
| 6 | SW_Push | SW_MX_HS_1u | K1, K2, K3, K4, K5, K6 |
| 1 | RESET | SW_SPST_SKQG_WithStem | SW0 |
| 1 | HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12 | USB1 |
| 1 | PRTR5V0U2X | SOT143B | D1 |
| 6 | D | D_SOD-123 | D2, D3, D4, D5, D6, D7 |
| 1 | 1u | C_0805_2012Metric | C1 |
| 3 | 0.1u | C_0805_2012Metric | C2, C3, C4 |
| 1 | 10u | C_0805_2012Metric | C5 |
| 2 | 22p | C_0805_2012Metric | C6, C7 |
| 2 | 10k | R_0805_2012Metric | R1, R4 |
| 2 | 22 | R_0805_2012Metric | R2, R3 |
| 2 | 5.1k | R_0805_2012Metric | R7, R8 |
6k keypad design files
The KiCad project lives in the souffle17/6k-keypad repository on GitHub; these links point at the commit this page was built from.
- Layoutkeypad-pcb.kicad_pcb
- Schematickeypad-pcb.kicad_sch
6k keypad: common questions
What microcontroller does the 6k keypad use?
The 6k keypad is built around the ATmega32U4-A, from the AVR/Arduino family.
How big is the 6k keypad PCB?
The 6k keypad measures 72.4 × 83.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 6k keypad?
32 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the 6k keypad design files?
From the souffle17/6k-keypad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 6k keypad design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which souffle17 chose for the repository.
Can I test firmware for the 6k keypad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k