87 open source boards using the ATmega32U4-A
Real designs built with the ATmega32U4-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LHS Controller
dmcke5
26.5 × 26.5 mm61 parts2LCERN-OHL-S-2.0131AVR/Arduino
Power Supply (plus UBBB 32u4 rev 1.2)
thebiguno
99.1 × 99.1 mm189 parts2LNo license75AVR/Arduino
Barobord
sadekbaroudi
243.9 × 136.5 mm157 parts2LNo license57AVR/Arduino
Essentials of PCB Design Track 1 Board
ieee-wpi
102 × 40 mm49 parts2LCC-BY-SA-4.014AVR/Arduino
BirthdayCakeKeyboard
JimGage
73 × 102.5 mm61 parts2LNo license13AVR/Arduino
Phnx
sini6a
286.3 × 133.4 mm178 parts4LNo license4AVR/Arduino
SunsetterR2 Hotswap
PiKeeb
345.7 × 98.9 mm174 parts2LCC-BY-SA-4.04AVR/Arduino
MainBoard BrooksGen5XMini
tristanmelton
259.5 × 133 mm108 parts2LMIT3- schematic only · 332 partsAVR/Arduino
Skayboard
Skaytacium
332 partsMIT3 AVR/Arduino
Mf3dre
Zokhoi
136 × 135 mm135 parts2LNo license2AVR/Arduino
Macropad
vlee6
58.5 × 80.9 mm52 parts2LNo license2AVR/Arduino
KeeBoard
scattercat-123
351.9 × 99.3 mm267 parts2LNo license1AVR/Arduino
Mithril panneled
sanfeps
132.8 × 138.8 mm216 parts4LNo license1AVR/Arduino
Highway-Keyboard
SomeonetookVeracles
364.6 × 139.2 mm193 parts2LApache-2.01AVR/Arduino
Keyboard
achyrocalyx
308 × 127 mm186 parts2LNo license1AVR/Arduino
Custom keyboard
balkacer
292 × 99.9 mm135 parts2LNo license1AVR/Arduino
SdraKb00
drabaioli
176.2 × 83.4 mm85 parts2LMIT1AVR/Arduino
CustomMacroDeck
Jakov4848
69.5 × 117.5 mm80 parts2LNo license1AVR/Arduino
Keyboard3-L
e04
130.8 × 111 mm78 parts2LNo license1AVR/Arduino
NugMacro-Keypad
Sir-keet
76.2 × 95.2 mm51 parts2LMIT1AVR/Arduino
Keyboard
IntelektualProjects
359.6 × 136.4 mm194 parts2LMIT0AVR/Arduino
Macropad from scratch
paulmtn
304.8 × 119.9 mm190 parts2LNo license0AVR/Arduino
Detach75-keyboard
seakrueger
319.9 × 131 mm188 parts2LApache-2.00AVR/Arduino
Ortho Allison
kajahtaa
319.7 × 129.2 mm186 parts2LNo license0AVR/Arduino
Sg75
carrizo93
314.3 × 123.8 mm181 parts2LMIT0AVR/Arduino
KBD
magwas
283.7 × 110 mm173 parts2LNo license0AVR/Arduino
65 percent keyboard
wemsh05
335.5 × 146 mm157 parts2LNo license0AVR/Arduino
Kicad-Keyboard
archerlepke
304.8 × 100 mm155 parts2LNo license0AVR/Arduino
60 Keyboard
laxlucien
285.7 × 95.2 mm152 parts2LMIT0AVR/Arduino
Simple-Keyboard-Project
MRM1790
285 × 94.6 mm150 parts2LNo license0AVR/Arduino
CustomKeeb2
Goblnn
309.6 × 100 mm150 parts2LNo license0AVR/Arduino
First-Keyboard attempt
StarLizard
237.3 × 107.8 mm139 parts2LNo license0AVR/Arduino
4040
lexerq
281.7 × 77 mm128 parts2LNo license0AVR/Arduino
Sherie
flora495
278.3 × 81.9 mm117 parts2LNo license0AVR/Arduino
Patriot Companion
dmiracle
104.7 × 84.8 mm82 parts2LNo license0AVR/Arduino
Multicartridge smd-32u4-front dipswitch
ifilot
80 × 100 mm72 parts2LNo license0
How designs wire the ATmega32U4-A
Read from the KiCad layouts of 62 open source designs, one per repository: what each pin of the ATmega32U4-A connects to, and the resistors, capacitors and other passives placed on it.
- The UCAP pin has a capacitor to GND on 61 of 62 designs, most often 1 µF (then 100 nF).
- The XTAL2 pin has a crystal on 60 of 62 designs, most often 16 MHz (then 8 MHz).
- The XTAL1 pin has a crystal on 60 of 62 designs, most often 16 MHz (then 8 MHz).
- The D- pin has a series resistor on 58 of 62 designs, most often 22 Ω.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PE6pin 1 | Connected to: Not connected 76% · a signal 24% | — |
| UVCCpin 2 | Connected to: 5V 95% |
|
| D-pin 3 | Connected to: Signal 97% |
|
| D+pin 4 | Connected to: Signal 97% |
|
| UGNDpin 5 | Connected to: GND 97% | — |
| UCAPpin 6 | Connected to: Signal 98% |
|
| VBUSpin 7 | Connected to: 5V 89% |
|
| RESETpin 13 | Connected to: A connector 40% |
|
| VCCpin 14, 34 | Connected to: 5V 97% |
|
| GNDpin 15, 23, 35, 43 | Connected to: GND 98% | — |
| XTAL2pin 16 | Connected to: Signal 98% |
|
| XTAL1pin 17 | Connected to: Signal 98% |
|
| AVCCpin 24, 44 | Connected to: 5V 95% |
|
| HWB/PE2pin 33 | Connected to: Signal 82% |
|
| AREFpin 42 | Connected to: Not connected 71% · a signal 27% | — |
24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LHS Controller PCB by dmcke5, Microsd append by thebiguno, Barobord by sadekbaroudi and Essentials of PCB Design Track 1 Board by ieee-wpi.
The ATmega32U4-A in open source designs
The gallery holds 87 open source boards using the ATmega32U4-A from 64 GitHub repositories; a typical one measures about 100 × 85.4 mm and carries around 65 components.
94% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is LHS Controller PCB by dmcke5.
Parts used alongside the ATmega32U4-A
Microcontrollers on boards using the ATmega32U4-A
What boards using the ATmega32U4-A are built for
ATmega32U4-A: common questions
Where can I find a ATmega32U4-A reference design?
Each of the 87 boards on this page is a real design using the ATmega32U4-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ATmega32U4-A UCAP pin connected?
The UCAP pin has a capacitor to GND on 61 of 62 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 62 open source designs using the ATmega32U4-A.
How is the ATmega32U4-A XTAL2 pin connected?
The XTAL2 pin has a crystal on 60 of 62 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 62 open source designs using the ATmega32U4-A.
How is the ATmega32U4-A XTAL1 pin connected?
The XTAL1 pin has a crystal on 60 of 62 designs, most often 16 MHz (then 8 MHz). Counted from the KiCad layouts of 62 open source designs using the ATmega32U4-A.
What parts are used alongside the ATmega32U4-A?
The USBLC6-2SC6, PRTR5V0U2X, AD8541, IMU_MOUNT and MCP2515-xSO appear in the most repositories here.
Which microcontrollers do boards using the ATmega32U4-A use?
Most are built on AVR/Arduino (84), RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the ATmega32U4-A?
The median is 100 × 85.4 mm, and 94% are two-layer designs.
What is the most popular open source board using the ATmega32U4-A?
By GitHub stars, LHS Controller PCB by dmcke5, with 131 stars.
Can I simulate one of these boards using the ATmega32U4-A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.