Main controller
sovanaram·Power-Electronics·Controller/Main controller.kicad_pcb
About the Main controller PCB
Main controller is an open source STM32 PCB design by sovanaram, published on GitHub. It is a 2-layer board measuring 52.5 × 77.1 mm, with 41 components from 25 distinct parts.
Its main chip is the STM32F401RCT6_BOARD1, from the STM32 family. By type, the board carries 25 connectors, 8 resistors, 2 diodes, 2 capacitors, 1 buzzer and 1 inductor.
From the project
Create and experiment power conversions
Main controller bill of materials (BOM)
41 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PWM | JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J1 |
| 1 | UV | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Voltage Sensor | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | Current Sensor | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Shutdown | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | 5V Supply | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | GND | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J7 |
| 4 | ~ | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J8, J9, J21, J25 |
| 1 | T | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J10 |
| 2 | 3.3V | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J11, J23 |
| 2 | IN | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J12, J13 |
| 6 | ~ | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J14, J15, J16, J17, J18, J24 |
| 2 | Conn_01x01 | PinSocket_1x01_P2.54mm_Vertical | J19, J20 |
| 1 | UART | JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J22 |
| 1 | Buzzer_5V | MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | ZPY5V1 | D_DO-34_SOD68_P7.62mm_Horizontal | DZ1 |
| 1 | ~ | STM32F401RCT6_BOARD1 | STM32F401RCT6_BOARD2 |
| 2 | LED | LED_D5.0mm | D1, D2 |
| 1 | Ferrite_Bead | L_Axial_L7.0mm_D3.3mm_P5.08mm_Vertical_Fastron_MICC | FB1 |
| 1 | 100uF/10V | CP_Radial_D7.5mm_P2.50mm | C1 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 104 | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 4 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4, R5, R8 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 2 | 2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
Main controller design files
The KiCad project lives in the sovanaram/Power-Electronics repository on GitHub; these links point at the commit this page was built from.
Main controller: common questions
What microcontroller does the Main controller use?
The Main controller is built around the STM32F401RCT6_BOARD1, from the STM32 family.
How big is the Main controller PCB?
The Main controller measures 52.5 × 77.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Main controller?
41 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Main controller design files?
From the sovanaram/Power-Electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Main controller design in my own project?
The repository has no license, so all rights stay with sovanaram. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Main controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in Power-Electronics
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k