INVERTER
sovanaram·Power-Electronics·Inverter Board/Inverter/Inverter.kicad_pcb
About the INVERTER PCB
INVERTER is an open source PCB design by sovanaram, published on GitHub. It is a 2-layer board measuring 112.8 × 83.1 mm, with 52 components from 31 distinct parts.
Other key parts include the L7805 and L7812. By type, the board carries 14 resistors, 11 capacitors, 8 diodes, 7 connectors, 5 transistors and 2 ICs.
From the project
Create and experiment power conversions
Main components on the INVERTER
INVERTER bill of materials (BOM)
52 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 1 | L7812 | TO-220-3_Vertical | U2 |
| 4 | FGH40N60SFD | TO-247-3_Vertical | Q1, Q2, Q3, Q4 |
| 1 | 2N2222A | TO-92_Inline_Wide | Q6 |
| 1 | EGS002 | PinSocket_1x17_P2.54mm_Vertical | J1 |
| 1 | FAN | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Vin | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | L | TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J4 |
| 1 | N | TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J5 |
| 1 | VDD | TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J6 |
| 1 | GND | TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 | J7 |
| 1 | BZD23-C5V1 | D_DO-41_SOD81_P10.16mm_Horizontal_Zener | DZ1 |
| 1 | Filter_EMI_LL | Choke_Schaffner_RN102-04-14.0x14.0mm | FL1 |
| 1 | Heatsink_Pad_3Pin | heatsink | HS1 |
| 1 | 10K | Potentiometer_RM065 | RV1 |
| 4 | 1N4148 | D_DO-35_SOD27_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | MUR460 | D_DO-201AD_P12.70mm_Horizontal | D5, D6, D7, D8 |
| 1 | 3.3mH | L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 | L1 |
| 1 | 225/400V | C_Rect_L24.0mm_W7.0mm_P22.50mm_MKT | C1 |
| 3 | 104 | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C7, C8 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220uF/10V | CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 103 | C_Disc_D5.0mm_W2.5mm_P5.00mm | C4 |
| 1 | 100uF/25V | CP_Radial_D7.5mm_P2.50mm | C5 |
| 1 | 330uF/35V | CP_Radial_D7.5mm_P2.50mm | C6 |
| 3 | 0.1u/275V | C_Rect_L13.5mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 | C9, C10, C11 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R12 |
| 4 | 4.7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R8 |
| 2 | 100K | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R10, R14 |
| 1 | 0.4 | shun_L10mm | R11 |
| 1 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R16 |
| 1 | NTC/10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R17 |
INVERTER design files
The KiCad project lives in the sovanaram/Power-Electronics repository on GitHub; these links point at the commit this page was built from.
INVERTER: common questions
How big is the INVERTER PCB?
The INVERTER measures 112.8 × 83.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the INVERTER?
52 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the INVERTER design files?
From the sovanaram/Power-Electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the INVERTER design in my own project?
The repository has no license, so all rights stay with sovanaram. Use it as a reference, and ask the author before reusing the design.