Voltage Sensor
sovanaram·Power-Electronics·Voltage Sensor/Voltage Sensor.kicad_pcb
About the Voltage Sensor PCB
Voltage Sensor is an open source PCB design by sovanaram, published on GitHub. It is a 2-layer board measuring 96.7 × 59.4 mm, with 46 components from 14 distinct parts.
Other key parts include the LV25-P. By type, the board carries 36 resistors, 4 connectors, 3 capacitors, 2 diodes and 1 IC.
It belongs with the sensors designs in this gallery.
From the project
Create and experiment power conversions
Main components on the Voltage Sensor
Voltage Sensor bill of materials (BOM)
46 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LV25-P | LEM_LV25-P | U2 |
| 1 | V_sens | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J10 |
| 1 | 400VDC | Pin_D1.3mm_L11.3mm_W2.8mm_Flat | J14 |
| 1 | GND | Pin_D1.3mm_L11.3mm_W2.8mm_Flat | J16 |
| 1 | 12V_Vsens | JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J18 |
| 1 | 1N4007 | D_A-405_P10.16mm_Horizontal | D18 |
| 1 | D | D_A-405_P10.16mm_Horizontal | D19 |
| 1 | 102 | C_Disc_D4.3mm_W1.9mm_P5.00mm | C10 |
| 1 | 100uF/25 | CP_Radial_D8.0mm_P3.50mm | C34 |
| 1 | 104 | C_Disc_D4.3mm_W1.9mm_P5.00mm | C35 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R29 |
| 32 | 100k | R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R19, R20, R21, R22, R23, R31, R32, R33 +24 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24 |
Voltage Sensor design files
The KiCad project lives in the sovanaram/Power-Electronics repository on GitHub; these links point at the commit this page was built from.
Voltage Sensor: common questions
How big is the Voltage Sensor PCB?
The Voltage Sensor measures 96.7 × 59.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Voltage Sensor?
46 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Voltage Sensor design files?
From the sovanaram/Power-Electronics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Voltage Sensor design in my own project?
The repository has no license, so all rights stay with sovanaram. Use it as a reference, and ask the author before reusing the design.
More boards in Power-Electronics
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956