Hdmi pmod
About the Hdmi pmod PCB
Hdmi pmod is an open source PCB design by sparkengineering, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 40 × 20 mm, with 6 components from 5 distinct parts.
Other key parts include the LM2775DSGT. By type, the board carries 3 capacitors, 2 connectors and 1 IC.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
HDMI type A receptacle to Digilent Pmod™ breakout board
HDMI type A receptacle to Digilent Pmod™ breakout board.
- Impedance matched & length tuned differential lines - Includes 3.3V to 5V boost converter (max. 200mA) - Pinout to match Digilent high-speed Pmod™ e.g. on Arty A7 - Tested with Arty A7 board at 1280x720 @ 60HZ
- FPGA display controller with support for VGA, DVI, and HDMI [^1] - Digital Visual Interface Specification Version 1.0 [^2] - BML DVI digital video for FPGAs over PMOD [^3] - fpga4fun.com HDMI [^4] - Hackaday.io HDMI PMOD [^5]
Main components on the Hdmi pmod
Hdmi pmod bill of materials (BOM)
6 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2775DSGT LM2775DSG | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U1 |
| 1 | 826634-6 Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Horizontal | J1 |
| 1 | 208658-1001 HDMI_A | HDMI_A_Molex_208658-1001_Horizontal | J2 |
| 2 | GRM155R61C225KE11D 2.2µF | C_0402_1005Metric | C1, C3 |
| 1 | GRM155R61C105KA12D 1µF | C_0402_1005Metric | C2 |
Hdmi pmod design files
The KiCad project lives in the sparkengineering/hdmi-pmod repository on GitHub; these links point at the commit this page was built from.
- Layouthdmi-pmod.kicad_pcb
- Schematichdmi-pmod.kicad_sch
Hdmi pmod: common questions
How big is the Hdmi pmod PCB?
The Hdmi pmod measures 40 × 20 mm, has 4 copper layers and is 1.60252 mm thick.
How many components are on the Hdmi pmod?
6 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hdmi pmod design files?
From the sparkengineering/hdmi-pmod repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hdmi pmod design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which sparkengineering chose for the repository.
Similar boards
88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
Rj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979