SparkFun Serial MP3 Player Shield MY1690X panelized
sparkfun·SparkFun_Serial_MP3_Player_Shield-MY1690X·Hardware/Production/SparkFun_Serial_MP3_Player_Shield_MY1690X_panelized.kicad_pcb
About the SparkFun Serial MP3 Player Shield MY1690X panelized
SparkFun Serial MP3 Player Shield MY1690X panelized is an open source AVR/Arduino PCB design by sparkfun, published on GitHub under the MIT license. It is a 2-layer board measuring 120.9 × 203.9 mm, with 38 components from 33 distinct parts.
Its main chip is the Arduino_Uno_R3_Shield, from the AVR/Arduino family. Other key parts include the MY1690X. By type, the board carries 7 jumpers, 7 capacitors, 7 resistors, 6 connectors, 5 diodes and 1 IC.
It belongs with the dev boards & breakouts and audio designs in this gallery.
From the project
An Arduino R3 compatible shield for playing MP3s with a serial interface.
SparkFun Serial MP3 Player Shield - MY1690X ========================================
SparkFun Serial MP3 Player Shield - MY1690X (DEV-28021)
The SparkFun Serial MP3 Player Shield - MY1690X is an R3 Arduino shield built around the MY1690X audio decoder IC. The MY1691X supports both .WAV and .MP3 audio files stored on a connected microSD card with up to 32GB capacity and formatted to FAT16 or FAT32. The MY1690X communicates over serial UART so we designed this shield to allow users to control the MY1690X while mounted on a compatible Arduino development board with an R4 footprint.

Main components on the SparkFun Serial MP3 Player Shield MY1690X panelized
SparkFun Serial MP3 Player Shield MY1690X panelized bill of materials (BOM)
38 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MY1690X | SO-16 | U2 |
| 1 | BSS138 | SOT23-3 | Q1 |
| 1 | 3.5mm TRRS | Audio_Jack_3.5mm_TRRS_SMD_RA | J1 |
| 1 | Conn_01x04 | 1x04 | J2 |
| 1 | Qwiic_RA | JST_SMD_1.0mm-4_Black | J3 |
| 1 | USB_C_Receptacle | USB-C_16 | J4 |
| 1 | ISP | 2x03_NoSilk | J5 |
| 1 | microSD | microSD_External_Pin | J6 |
| 1 | Arduino_Uno_R3_Shield | Uno_R3_Shield_NoLabels | B1 |
| 1 | 6V/0.5A/1A | 0805 | F1 |
| 1 | BUSY | Jumper_2_NC_Trace | JP1 |
| 1 | PWR | Jumper_2_NC_Trace | JP2 |
| 1 | CD | Jumper_2_PTH_SMD_Combo-NC | JP3 |
| 1 | BUSY | Jumper_2_PTH_SMD_Combo-NC | JP4 |
| 1 | RX | Jumper_2_PTH_SMD_Combo-NC | JP5 |
| 1 | TX | Jumper_2_PTH_SMD_Combo-NC | JP6 |
| 1 | SLV | Jumper_2_NC_Trace | JP7 |
| 1 | SMD_5.2x5.2mm_h2.5mm | Push_SMD_5.2x5.2mm_h2.5mm | SW1 |
| 1 | Green | LED_0603_1608Metric_Green | D1 |
| 2 | BAT60A | SOD-323 | D2, D3 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Red | LED_0603_1608Metric_Red | D4 |
| 1 | DT1042-04SO | SOT23-6 | D5 |
| 1 | 470Ohm | C_0603_1608Metric | L1 |
| 2 | 2.2uF | C_0603_1608Metric | C1, C7 |
| 1 | 10uF | C_0603_1608Metric | C2 |
| 1 | 0.1uF | C_0603_1608Metric | C3 |
| 2 | 47uF | C_0805_2012Metric | C4, C5 |
| 1 | 1.0uF | C_0603_1608Metric | C8 |
| 2 | 2.2k | R_0603_1608Metric | R1, R4 |
| 2 | 5.1k | R_0603_1608Metric | R2, R3 |
| 1 | 1k | R_0603_1608Metric | R5 |
| 1 | 10k | R_0603_1608Metric | R7 |
| 1 | 4.7k | R_0603_1608Metric | R9 |
SparkFun Serial MP3 Player Shield MY1690X panelized design files
The KiCad project lives in the sparkfun/SparkFun_Serial_MP3_Player_Shield-MY1690X repository on GitHub; these links point at the commit this page was built from.
SparkFun Serial MP3 Player Shield MY1690X panelized: common questions
What microcontroller does the SparkFun Serial MP3 Player Shield MY1690X panelized use?
The SparkFun Serial MP3 Player Shield MY1690X panelized is built around the Arduino_Uno_R3_Shield, from the AVR/Arduino family.
How big is the SparkFun Serial MP3 Player Shield MY1690X panelized?
The SparkFun Serial MP3 Player Shield MY1690X panelized measures 120.9 × 203.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SparkFun Serial MP3 Player Shield MY1690X panelized?
38 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the SparkFun Serial MP3 Player Shield MY1690X panelized design files?
From the sparkfun/SparkFun_Serial_MP3_Player_Shield-MY1690X repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SparkFun Serial MP3 Player Shield MY1690X panelized design in my own project?
Yes, under the terms of its MIT license, which sparkfun chose for the repository.
Can I test firmware for the SparkFun Serial MP3 Player Shield MY1690X panelized without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in SparkFun_Serial_MP3_Player_Shield-MY1690X
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k