HardLabs

Usb breakout

speedypotato·SplitFox-Pro·pcb/usb-breakout/usb-breakout.kicad_pcb

Usb breakout layout, top view — open source board by speedypotato

About the Usb breakout

Usb breakout is an open source PCB design by speedypotato, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 20 × 20 mm, with 4 components from 3 distinct parts.

By type, the board carries 2 resistors and 1 connector.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Split-style Pro Leverless Controller

This is where the PCB source file(s) live

Usb breakout bill of materials (BOM)

4 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C5118704
S7B-ZR-SM4A-TF(LF)(SN)_C5118704
CN1
1
TYPE-C-31-M-12
USBC1
2
5K1
5k1
R1, R2

Usb breakout design files

The KiCad project lives in the speedypotato/SplitFox-Pro repository on GitHub; these links point at the commit this page was built from.

Usb breakout: common questions

How big is the Usb breakout?

The Usb breakout measures 20 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Usb breakout?

4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Usb breakout design files?

From the speedypotato/SplitFox-Pro repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Usb breakout design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in SplitFox-Pro

Similar boards