HardLabs

Magnetometer A

spel-uchile·S2_S3_PS_MAG_PCBs·PC104 - plansat/MAG_plus/Magnetometer_A.kicad_pcb

Magnetometer A PCB layout, top view — open source PIC board by spel-uchile

About the Magnetometer A PCB

Magnetometer A is an open source PIC PCB design by spel-uchile, published on GitHub. It is a 2-layer board measuring 92.7 × 87 mm, with 30 components from 20 distinct parts.

Its main chip is the PIC16F1847-I_SO, from the PIC family. Other key parts include the PES1-S5-D24-M, DAC7562SDGST and ADA4522-1ARMZ. By type, the board carries 9 capacitors, 8 connectors, 8 resistors, 4 ICs and 1 switch.

It belongs with the rf & radio designs in this gallery.

From the project

A summary of the different MAG derived PCBs used in SUCHAI 2, SUCHAI 3 and Plansat Satellites

- CADs: CAD files of some PCBs - Grafeno V2: KiCAD version of Graphene PCB (for debugging) - minisensor: Magnetometer PCB sensor implementation for testing - PAD: Panel A Cubesat with holes for Langmuir Probe voltage regulator (used as dummy Panel A) - Panel A E S2: External Panel A Suchai-2. Includes the Magnetometer socket and holes to place the Shielded Langmuir Probe Electronic PCB. - Panel A E S2 - Plansat: External Panel A Plansat. Includes the Magnetometer socket. - Panel A E S3: External Panel A Suchai-3. Includes the Magnetometer socket and holes to place the Langmuir Probe Sensor…

Main components on the Magnetometer A

PES1-S5-D24-MDAC7562SDGSTADA4522-1ARMZPIC16F1847-I_SO

Magnetometer A bill of materials (BOM)

30 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PES1-S5-D24-M
LP38693MP-3.3
CUI Inc
U1
1
DAC7562SDGST
Payload
Texas Instruments
U2
1
ADA4522-1ARMZ
ISO1540
Analog Devices
U3
1
PIC16F1847-I_SO
U9
1
RPi_GPIO
J33
1
Conn_01x06_Male
J34
3
Conn_01x04_Female
J49, J54, J55
1
Conn_01x06_Female
J56
2
Conn_01x04_Male
J58, J59
1
SW_Push
SW1
1
UMK316ABJ475MLHT
C
Taiyo Yuden
C5
1
CC0603KRX7R8BB104
C
Yageo
C6
1
UMF107B7223KAHT
C
Taiyo Yuden
C7
5
C
DNP/DNI
C8, C9, C12, C14, C20
1
LMK212SD104KG-T
C
Taiyo Yuden
C11
2
RNCP0805FTD10K0
R
Stackpole
R1, R3
3
RC0603JR-070RL
R
Yageo
R2, R7, R14
1
PAT0603E4000BST1
R
Vishay
R4
1
RN732BTTD3203B25
R
KOA Speer
R5
1
ERA-3AEB332V
R
Panasonic
R6

Magnetometer A design files

The KiCad project lives in the spel-uchile/S2_S3_PS_MAG_PCBs repository on GitHub; these links point at the commit this page was built from.

Magnetometer A: common questions

What microcontroller does the Magnetometer A use?

The Magnetometer A is built around the PIC16F1847-I_SO, from the PIC family.

How big is the Magnetometer A PCB?

The Magnetometer A measures 92.7 × 87 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Magnetometer A?

30 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Magnetometer A design files?

From the spel-uchile/S2_S3_PS_MAG_PCBs repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Magnetometer A design in my own project?

The repository has no license, so all rights stay with spel-uchile. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Magnetometer A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in S2_S3_PS_MAG_PCBs

Similar boards