G-LED-5V

sprocketstech·sprocklets·boards/cogs/G-LED-5V/G-LED-5V.kicad_pcb

G-LED-5V PCB layout, top view — open source AVR/Arduino board by sprocketstech

About the G-LED-5V PCB

G-LED-5V is an open source AVR/Arduino PCB design by sprocketstech, published on GitHub. It is a 2-layer board measuring 57.3 × 29.5 mm, with 7 components from 7 distinct parts.

Its main chip is the attiny85, from the AVR/Arduino family. By type, the board carries 3 connectors, 2 resistors, 1 IC and 1 transistor.

From the project

Implementation repository for the Sprocklets modular hardware ecosystem. Board descriptions are written in a small DSL (.part / .sboard), compiled to KiCad schematics by sboardc, with PCB layout hand-edited in KiCad.

Implementation repository for the Sprocklets modular hardware ecosystem. Board descriptions are written in a small DSL (.part / .sboard), compiled to KiCad schematics by sboardc, with PCB layout hand-edited in KiCad.

Normative specs (connectors, mechanical grid, protocol, naming) live in sprockletsspec. This repo holds the component catalog, board DSL, sboardc and sprkc compilers (Go), firmware (.sprk` + PlatformIO), and build scripts.

Main components on the G-LED-5V

G-LED-5V bill of materials (BOM)

7 components, 7 distinct parts.

QtyPartRefs
1
attiny85
U1
1
2222a
Q1
1
cog_in
J1
1
cog_out
J2
1
terminal_4
J3
1
1k
R1
1
220
R2

G-LED-5V design files

The KiCad project lives in the sprocketstech/sprocklets repository on GitHub; these links point at the commit this page was built from.

G-LED-5V: common questions

What microcontroller does the G-LED-5V use?

The G-LED-5V is built around the attiny85, from the AVR/Arduino family.

How big is the G-LED-5V PCB?

The G-LED-5V measures 57.3 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the G-LED-5V?

7 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the G-LED-5V design files?

From the sprocketstech/sprocklets repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the G-LED-5V design in my own project?

The repository has no license, so all rights stay with sprocketstech. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the G-LED-5V without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in sprocklets

Similar boards