DCC-light flasher

SpyCrabIndustries·DCC-light-flasher·Endor_N_scale_bassic_DCC_decoder_mk1/Endor_N_scale_bassic_DCC_decoder_mk1.kicad_pcb

DCC-light flasher PCB layout, top view — open source AVR/Arduino board by SpyCrabIndustries

About the DCC-light flasher PCB

DCC-light flasher is an open source AVR/Arduino PCB design by SpyCrabIndustries, published on GitHub. It is a 2-layer board measuring 17 × 27 mm, with 19 components from 13 distinct parts.

Its main chip is the ATtiny85-20S, from the AVR/Arduino family. Other key parts include the LDI1117-05U. By type, the board carries 7 resistors, 3 connectors, 3 capacitors, 2 ICs, 2 transistors and 2 diodes.

From the project

DCC light flasher PCB

this is a quick and dirty PCB for at attiny85 based DCC decoder for turning lights on on rolling stock ect. right now all the markdown and files are kinda a mess. if aanyone wants to sort it and make a PR be my guest ;3

currently the only thing up here was made to do this: https://www.youtube.com/watch?v=XgUUQQwzfhY gerber files are in the folder labeled gerber. the schematic & BOM is in the folder labeled schematic !!!check the schematic befor fabbing this i have not tested it!!! the whole kicad folde is also up here so yall can mess with it if you'd like.

Main components on the DCC-light flasher

ATtiny85-20SLDI1117-05U

DCC-light flasher bill of materials (BOM)

19 components, 13 distinct parts.

QtyPartRefs
1
ATtiny85-20S
U1
1
LDI1117-05U
U2
2
Q_NPN_BEC
Q1, Q2
2
Conn_01x04
J1, J2
1
Conn_01x06
J3
1
B05S
D1
1
D
D2
1
10u
C1
1
22u
C2
1
BYPASS
C3
1
READ
R1
4
1k
R2, R3, R4, R5
2
PULL
R6, R7

DCC-light flasher design files

The KiCad project lives in the SpyCrabIndustries/DCC-light-flasher repository on GitHub; these links point at the commit this page was built from.

DCC-light flasher: common questions

What microcontroller does the DCC-light flasher use?

The DCC-light flasher is built around the ATtiny85-20S, from the AVR/Arduino family.

How big is the DCC-light flasher PCB?

The DCC-light flasher measures 17 × 27 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DCC-light flasher?

19 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the DCC-light flasher design files?

From the SpyCrabIndustries/DCC-light-flasher repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the DCC-light flasher design in my own project?

The repository has no license, so all rights stay with SpyCrabIndustries. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the DCC-light flasher without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards