Yaesu FTS-8 CTCSS
sq9pdj·Yaesu_FTS-8_CTCSS
About the Yaesu FTS-8 CTCSS PCB
Yaesu FTS-8 CTCSS is an open source PIC PCB design by sq9pdj, published on GitHub under the MIT license. It is a 2-layer board measuring 38.6 × 20.8 mm, with 30 components from 15 distinct parts.
Its main chip is the PIC16F628A-ISO, from the PIC family. By type, the board carries 14 capacitors, 11 resistors, 2 connectors, 1 IC, 1 crystal and 1 diode.
From the project
Yaesu FTS-8 CTCSS Replacement (Encoder Only)
This project is the result of creating an FTS-8 CTCSS module for a Yaesu FT-736, owned by my friend.
It's a recreation of the PCB from an existing 2003 project by Juha Niinikoski OH2NLT: https://www.jumaradio.com/oh2nlt/Ctcss/ctcss.htm
I created this PCB to make an order with a PCB manufacturing company. The schematic is electrically identical, with only a slight reordering of part numbering.

Main components on the Yaesu FTS-8 CTCSS
Yaesu FTS-8 CTCSS bill of materials (BOM)
30 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F628A-ISO | SOIC-18W_7.5x11.6mm_P1.27mm | U1 |
| 1 | 4 MHz | Crystal_SMD_HC49-SD | X1 |
| 1 | CONN_01X08 Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | LED | D_0805_2012Metric | D1 |
| 9 | 100N 100n | C_0805_2012Metric | C1, C2, C3, C4, C5, C6, C7, C8 +1 |
| 2 | 33P 33p | C_0805_2012Metric | C10, C11 |
| 1 | 1u | CP_EIA-3216-18_Kemet-A_HandSolder | C12 |
| 1 | 2.2U 2.2u | CP_EIA-3216-18_Kemet-A_HandSolder | C13 |
| 1 | 1n | C_0805_2012Metric | C14 |
| 7 | 10K 10k | R_0805_2012Metric | R1, R2, R3, R4, R5, R8, R11 |
| 1 | 22K 22k | R_0805_2012Metric | R6 |
| 1 | 1k | R_0805_2012Metric | R7 |
| 1 | 6K8 6k8 | R_0805_2012Metric | R9 |
| 1 | 47K 47k | R_0805_2012Metric | R10 |
Yaesu FTS-8 CTCSS design files
The KiCad project lives in the sq9pdj/Yaesu_FTS-8_CTCSS repository on GitHub; these links point at the commit this page was built from.
Yaesu FTS-8 CTCSS: common questions
What microcontroller does the Yaesu FTS-8 CTCSS use?
The Yaesu FTS-8 CTCSS is built around the PIC16F628A-ISO, from the PIC family.
How big is the Yaesu FTS-8 CTCSS PCB?
The Yaesu FTS-8 CTCSS measures 38.6 × 20.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Yaesu FTS-8 CTCSS?
30 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Yaesu FTS-8 CTCSS design files?
From the sq9pdj/Yaesu_FTS-8_CTCSS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Yaesu FTS-8 CTCSS design in my own project?
Yes, under the terms of its MIT license, which sq9pdj chose for the repository.
Can I test firmware for the Yaesu FTS-8 CTCSS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379