BlackBoxProbeMicro
Squantor·blackBoxProbe·electronics/blackBoxProbeMicro/blackBoxProbeMicro.kicad_pcb
About the BlackBoxProbeMicro PCB
BlackBoxProbeMicro is an open source STM32 PCB design by Squantor, published on GitHub under the MIT license. It is a 4-layer board measuring 29 × 29 mm, with 63 components from 36 distinct parts.
Its main chip is the STM32F103CBT, from the STM32 family. Other key parts include the MCP1702-MB and DT1446-04S. By type, the board carries 28 resistors, 11 capacitors, 5 diodes, 4 connectors, 3 ICs and 3 inductors.
From the project
A boxed clone of the black magic probe
Main components on the BlackBoxProbeMicro
BlackBoxProbeMicro bill of materials (BOM)
63 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1702-MB | SOT89-NXP | U1 |
| 1 | DT1446-04S | SOT363-DiodesInc | U2 |
| 1 | STM32F103CBT | LQFP48-STM | U3 |
| 1 | BSD840N | SOT363-ONsemi | Q1 |
| 1 | NTJD4152P | SOT363-ONsemi | Q2 |
| 1 | 8MHz | Crystal_3225_4 | Y1 |
| 1 | USB-C | USB-C-HRO-31-M-12 | J1 |
| 2 | JTAG_2X05 | Header-0127-2X05-H006 | J2, J3 |
| 1 | DevBoardUartOutput | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J4 |
| 1 | 0.5A | F_0603_hand | F1 |
| 1 | 0.3A | F_0603_hand | F2 |
| 1 | V:20240218 | Label_Generic | N2 |
| 1 | JLCJLCJLC | Label_Generic | N3 |
| 1 | DFU | TD-85XU | S1 |
| 1 | tmsdir | TestPoint_hole_H03R07 | TP1 |
| 1 | yellow/green | LED_0603_hand | D1 |
| 1 | amber | LED_0603_hand | D2 |
| 1 | orange | LED_0603_hand | D3 |
| 1 | blue | LED_0603_hand | D4 |
| 1 | red | LED_0603_hand | D5 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 600 | L_0603 | FB1 |
| 2 | 600 | L_0402 | FB2, FB3 |
| 1 | 1u | C_0603 | C1 |
| 2 | 1uF | C_0402 | C3, C11 |
| 1 | 10u | C_0603 | C4 |
| 5 | 1u | C_0402 | C5, C6, C7, C8, C10 |
| 2 | 10p | C_0402 | C12, C13 |
| 1 | 330 | R_0402_hand | R1 |
| 4 | 1K | R_0402_hand | R2, R3, R4, R5 |
| 5 | 10K | R_0402_hand | R6, R11, R12, R20, R28 |
| 2 | 4.7K | R_0402_hand | R7, R10 |
| 6 | 100 | R_0402_hand | R8, R9, R13, R14, R15, R17 |
| 1 | 1.5K | R_0402_hand | R16 |
| 5 | 47K | R_0402_hand | R18, R22, R23, R24, R25 |
| 2 | 5.1K | R_0402_hand | R19, R21 |
| 2 | 22R | R_0402_hand | R27, R34 |
BlackBoxProbeMicro design files
The KiCad project lives in the Squantor/blackBoxProbe repository on GitHub; these links point at the commit this page was built from.
BlackBoxProbeMicro: common questions
What microcontroller does the BlackBoxProbeMicro use?
The BlackBoxProbeMicro is built around the STM32F103CBT, from the STM32 family.
How big is the BlackBoxProbeMicro PCB?
The BlackBoxProbeMicro measures 29 × 29 mm, has 4 copper layers and is 1.592 mm thick.
How many components are on the BlackBoxProbeMicro?
63 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the BlackBoxProbeMicro design files?
From the Squantor/blackBoxProbe repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the BlackBoxProbeMicro design in my own project?
Yes, under the terms of its MIT license, which Squantor chose for the repository.
Can I test firmware for the BlackBoxProbeMicro without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in blackBoxProbe
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k