3 open source boards using the MCP1702-MB
Real designs built with the MCP1702-MB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nuclone devboard small 4 layer
Squantor
50 × 50 mm37 parts4LMIT24
Nuclone devboard small 2 layer USB-C data
50 × 50 mm36 parts2LMIT24
Nuclone devboard small 2 layer USB-C PD
50 × 50 mm34 parts2LMIT24
The MCP1702-MB in open source designs
The gallery holds 3 open source boards using the MCP1702-MB from 1 GitHub repository; a typical one measures about 50 × 50 mm and carries around 36 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Nuclone devboard small 4 layer by Squantor.
What boards using the MCP1702-MB are built for
MCP1702-MB: common questions
Where can I find a MCP1702-MB reference design?
Each of the 3 boards on this page is a real design using the MCP1702-MB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the MCP1702-MB?
The median is 50 × 50 mm, and 67% are two-layer designs.
What is the most popular open source board using the MCP1702-MB?
By GitHub stars, Nuclone devboard small 4 layer by Squantor, with 24 stars.
Can I simulate one of these boards using the MCP1702-MB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.