AdvancedProgrammableElectronics
SR-Madsen·AdvancedProgrammableElectronics·Hardware/2022_02_06_cmoda7_hat_V1.0/cmoda7_hat/cmoda7_hat.kicad_pcb
About the AdvancedProgrammableElectronics PCB
AdvancedProgrammableElectronics is an open source PCB design by SR-Madsen, published on GitHub. It is a 2-layer board measuring 65 × 56 mm, with 36 components from 17 distinct parts.
Other key parts include the CMOD_A7 and LM1117-3.3. By type, the board carries 13 resistors, 8 diodes, 4 connectors, 4 capacitors, 2 ICs and 2 test points.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Repository used for storing projects from Vivado for the Advanced Programmable Electronics course on the 3rd semester of the Master in Electronics at the University of Southern Denmark.
Main components on the AdvancedProgrammableElectronics
AdvancedProgrammableElectronics bill of materials (BOM)
36 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CMOD_A7 | CMOD_A7 | U1 |
| 1 | LM1117-3.3 | TO-252-2 | U2 |
| 1 | 24MHz | Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm | X1 |
| 1 | Conn_02x20_Odd_Even | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | HDMI_A | HDMI_A_Female_2000-1-2-41-00-BK | J2 |
| 1 | RJ45 | RJ45_Amphenol_54602-x08_Horizontal | J3 |
| 1 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Horizontal | J4 |
| 2 | TestPoint_Flag | PROBE_PAD_1206 | GND1, GND2 |
| 2 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | TP1, TP2 |
| 1 | B260A-13-F | D_SMA_Handsoldering | D1 |
| 7 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5, D6, D7, D8 |
| 1 | 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 100uF | CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder | C2 |
| 2 | 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 4 | 1950R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 1 | 100R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 8 | 120R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6, R7, R8, R9, R10, R11, R12, R13 |
AdvancedProgrammableElectronics design files
The KiCad project lives in the SR-Madsen/AdvancedProgrammableElectronics repository on GitHub; these links point at the commit this page was built from.
AdvancedProgrammableElectronics: common questions
How big is the AdvancedProgrammableElectronics PCB?
The AdvancedProgrammableElectronics measures 65 × 56 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the AdvancedProgrammableElectronics?
36 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the AdvancedProgrammableElectronics design files?
From the SR-Madsen/AdvancedProgrammableElectronics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the AdvancedProgrammableElectronics design in my own project?
The repository has no license, so all rights stay with SR-Madsen. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979