IoTMaster
SR-Madsen·WirelessSensorNetwork·Master/IoTMasterPCB/IoTMasterPCB.kicad_pcb
About the IoTMaster PCB
IoTMaster is an open source STM32 PCB design by SR-Madsen, published on GitHub. It is a 4-layer board measuring 139.6 × 81.2 mm, with 142 components from 59 distinct parts.
Its main chip is the STM32F469IITx, from the STM32 family. Other key parts include the MYRGP330100B21RA, CLRC66303HNY, AT86RF232-ZX, MIC826TYMT-TR and KSZ8081MNX. By type, the board carries 64 capacitors, 51 resistors, 7 ICs, 7 inductors, 4 crystals and 3 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
STM32-based project for testing Internet of Things, Ethernet, RFID, and similar technologies.
A full block diagram of the project can be found as draw.io files in the Documentation folder, but is also shown below. In the documentation folder, a LaTeX report can also be found.

Main components on the IoTMaster
IoTMaster bill of materials (BOM)
142 components, 59 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F469IITx | LQFP-176_24x24mm_P0.5mm | U1 |
| 1 | MYRGP330100B21RA | MYRGP180100B21RA | U2 |
| 1 | CLRC66303HNY | CLRC66303HNY | U3 |
| 1 | AT86RF232-ZX | AT86RF232-ZX | U4 |
| 1 | MIC826TYMT-TR | MIC826TYMT-TR | U5 |
| 1 | KSZ8081MNX | KSZ8081MNX | U6 |
| 1 | W25Q32JVSS | SOIC-8_5.23x5.23mm_P1.27mm | U7 |
| 1 | ECS-250-18-33B-CKY-TR | ECS-250-18-33B-CKY | X1 |
| 1 | 27.12 MHz | ECS27121037AGNTR | X2 |
| 1 | 16 MHz | ECS1601633BCKMTR | X3 |
| 1 | ECS-5032MV-100-CN-TR | ECS5032MV250CNTR | X4 |
| 1 | M50-3610742R | M50-3610742R | J1 |
| 1 | 10118194-0001LF | 10118194-0001LF | J2 |
| 1 | RJMG1BD3B8K1ANR | RJMG1BD3B8K1ANR | J3 |
| 1 | NFC 13.56 MHz | NXP_NFC_13.56MHz | AE1 |
| 1 | 2450FB15L0001E | 2450FB15L0001E | B1 |
| 1 | ECMF02-4CMX8 | ECMF024CMX8 | FL1 |
| 1 | 5.6 V | D_MiniMELF | D1 |
| 1 | 150060SS55040 | 150060VS55040 | D2 |
| 1 | 150060VS55040 | 150060VS55040 | D3 |
Show 39 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 120 @ 100 MHz | L_0603_1608Metric | FB1 |
| 1 | 600R @ 100 MHz | L_1210_3225Metric | FB2 |
| 1 | 600R @ 100 MHz | L_0603_1608Metric | FB3 |
| 1 | 220R @ 100 MHz | L_0603_1608Metric | FB4 |
| 1 | BK1608HS601-T | BK1608HS601-T | L1 |
| 2 | 470 nH | SRN2512R47M | L2, L3 |
| 3 | 2.2 µF | C_0603_1608Metric | C1, C2, C19 |
| 26 | 100 nF | C_0603_1608Metric | C3, C4, C6, C7, C8, C9, C10, C11 +18 |
| 1 | 10 µF | C_0603_1608Metric | C5 |
| 3 | 1 µF | C_0603_1608Metric | C22, C24, C33 |
| 1 | 4.7 µF | C_0805_2012Metric | C26 |
| 3 | 10 µF | C_0805_2012Metric | C27, C48, C51 |
| 2 | 15 pF | C_0603_1608Metric | C29, C30 |
| 2 | 470 nF | C_0603_1608Metric | C31, C35 |
| 2 | 1 nF | C_0603_1608Metric | C36, C39 |
| 2 | 120 pF | C_0603_1608Metric | C37, C38 |
| 2 | 56 pF | C_0603_1608Metric | C40, C41 |
| 2 | 220 pF | C_0603_1608Metric | C42, C43 |
| 2 | 22 pF | C_0603_1608Metric | C45, C46 |
| 1 | RF_MATCH | C_0805_2012Metric | C49 |
| 1 | 22 pF C0G | C_0402_1005Metric | C50 |
| 2 | 27pF | C_0603_1608Metric | C53, C54 |
| 1 | 2.2uF | C_0603_1608Metric | C55 |
| 5 | 100nF | C_0603_1608Metric | C56, C59, C60, C61, C62 |
| 2 | 22uF | C_1206_3216Metric | C57, C58 |
| 1 | 22uF | C_0603_1608Metric | C63 |
| 15 | 33 | R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8 +7 |
| 4 | 10 kOhm | R_0603_1608Metric | R16, R17, R19, R20 |
| 1 | 47 Ohm | R_0603_1608Metric | R18 |
| 1 | 0R | R_1206_3216Metric | R21 |
| 2 | 10k | R_0603_1608Metric | R22, R23 |
| 7 | 4.7k | R_0603_1608Metric | R24, R25, R32, R33, R37, R45, R46 |
| 2 | 12k | R_0603_1608Metric | R26, R27 |
| 11 | 1k | R_0603_1608Metric | R28, R29, R34, R35, R36, R38, R39, R40 +3 |
| 2 | 1.43 | R_0603_1608Metric | R30, R31 |
| 2 | 300 | R_0603_1608Metric | R41, R42 |
| 1 | 0 | R_1206_3216Metric | R43 |
| 1 | 6.49k | R_0603_1608Metric | R44 |
| 2 | 150 | R_0603_1608Metric | R50, R51 |
IoTMaster design files
The KiCad project lives in the SR-Madsen/WirelessSensorNetwork repository on GitHub; these links point at the commit this page was built from.
IoTMaster: common questions
What microcontroller does the IoTMaster use?
The IoTMaster is built around the STM32F469IITx, from the STM32 family.
How big is the IoTMaster PCB?
The IoTMaster measures 139.6 × 81.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IoTMaster?
142 components, from 59 distinct parts. The full bill of materials is listed on this page.
Where can I download the IoTMaster design files?
From the SR-Madsen/WirelessSensorNetwork repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the IoTMaster design in my own project?
The repository has no license, so all rights stay with SR-Madsen. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IoTMaster without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in WirelessSensorNetwork
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k