IoTSlave
SR-Madsen·WirelessSensorNetwork·Slave/IoTSlavePCB/IoTSlavePCB.kicad_pcb
About the IoTSlave PCB
IoTSlave is an open source STM32 PCB design by SR-Madsen, published on GitHub. It is a 4-layer board measuring 43.7 × 41.6 mm, with 50 components from 29 distinct parts.
Its main chip is the STM32L412RBT6P, from the STM32 family. Other key parts include the MCP73831T-2ACI/OT, MYRGP180100B21RA, MYRGP100100B21RA, SHTC3 and AT86RF232-ZX. By type, the board carries 26 capacitors, 8 resistors, 7 ICs, 3 connectors, 2 inductors and 1 crystal.
It belongs with the iot & wireless designs in this gallery.
From the project
STM32-based project for testing Internet of Things, Ethernet, RFID, and similar technologies.
A full block diagram of the project can be found as draw.io files in the Documentation folder, but is also shown below. In the documentation folder, a LaTeX report can also be found.

Main components on the IoTSlave
IoTSlave bill of materials (BOM)
50 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L412RBT6P | STM32L412RBT6P | U1 |
| 1 | MCP73831T-2ACI/OT | SOT-23-5 | U2 |
| 1 | MYRGP180100B21RA | MYRGP180100B21RA | U3 |
| 1 | MYRGP100100B21RA | MYRGP180100B21RA | U4 |
| 1 | SHTC3 | SHTC3 | U5 |
| 1 | AT86RF232-ZX | AT86RF232-ZX | U6 |
| 1 | IS25WQ040-JNLE | IS25WQ040-JNLE | U7 |
| 1 | 16 MHz | ECS1601633BCKMTR | X1 |
| 1 | M50-3610742R | M50-3610742R | J1 |
| 1 | 10118194-0001LF | 10118194-0001LF | J2 |
| 1 | Conn_01x02 | PinHeader_1x02_P1.27mm_Vertical | J3 |
| 1 | 2450FB15L0001E | 2450FB15L0001E | B1 |
| 1 | LIR2450 | SMTU2450-LF | BT1 |
| 1 | ECMF02-4CMX8 | ECMF024CMX8 | FL1 |
| 2 | 1k @ 100 MHz | L_0603_1608Metric | FB1, FB2 |
| 10 | 100 nF | C_0603_1608Metric | C1, C2, C3, C7, C8, C15, C18, C23 +2 |
| 1 | 10 nF | C_0603_1608Metric | C4 |
| 1 | 1 µF | C_0805_2012Metric | C5 |
| 7 | 10 µF | C_0805_2012Metric | C6, C9, C12, C14, C19, C22, C25 |
| 3 | 4.7 µF | C_0805_2012Metric | C10, C11, C13 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22 pF | C_0603_1608Metric | C16, C17 |
| 1 | RF_MATCH | C_0805_2012Metric | C20 |
| 1 | 22 pF C0G | C_0402_1005Metric | C21 |
| 1 | 4.7k | R_0603_1608Metric | R1 |
| 1 | 25k | R_0603_1608Metric | R2 |
| 1 | 0R | R_1206_3216Metric | R3 |
| 3 | 10k | R_0603_1608Metric | R4, R5, R8 |
| 1 | 10M | R_0603_1608Metric | R6 |
| 1 | 4.99M | R_0603_1608Metric | R7 |
IoTSlave design files
The KiCad project lives in the SR-Madsen/WirelessSensorNetwork repository on GitHub; these links point at the commit this page was built from.
IoTSlave: common questions
What microcontroller does the IoTSlave use?
The IoTSlave is built around the STM32L412RBT6P, from the STM32 family.
How big is the IoTSlave PCB?
The IoTSlave measures 43.7 × 41.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IoTSlave?
50 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the IoTSlave design files?
From the SR-Madsen/WirelessSensorNetwork repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the IoTSlave design in my own project?
The repository has no license, so all rights stay with SR-Madsen. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the IoTSlave without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in WirelessSensorNetwork
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k