156 open source boards using the W25Q32JVSS

Real designs built with the W25Q32JVSS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

156 boardsClear filters|Most starred

How designs wire the W25Q32JVSS

Read from the KiCad layouts of 118 open source designs, one per repository: what each pin of the W25Q32JVSS connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 92 of 117 designs, most often 100 nF (then 1 µF).
  • The CS pin has a pull-up to 3.3V on 56 of 118 designs, most often 10 kΩ (then 100 kΩ).
CSpin 1Connected to: The microcontroller 75%
  • Pull-up to 3.3V on 47% · 10 kΩ (37), 100 kΩ (4), 4.7 kΩ (4)
  • Series resistor on 36% · 1 kΩ (36), 10 kΩ (5), 0 Ω (2)
GNDpin 4Connected to: GND 97%
VCCpin 8Connected to: 3.3V 94%
  • Decoupling capacitor on 79% · 100 nF (107), 1 µF (9), 10 µF (7)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DIY-Gaming-Mouse by wareya, Blep hackerboard by CRImier, XassetteAsterisk by SdtElectronics and Plinkyblack hwmidi jacks by plinkysynth.

The W25Q32JVSS in open source designs

The gallery holds 156 open source boards using the W25Q32JVSS from 121 GitHub repositories; a typical one measures about 70 × 57.2 mm and carries around 75 components.

55% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.

The most starred is DIY-Gaming-Mouse by wareya.

Microcontrollers on boards using the W25Q32JVSS

W25Q32JVSS: common questions

Where can I find a W25Q32JVSS reference design?

Each of the 156 boards on this page is a real design using the W25Q32JVSS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the W25Q32JVSS VCC pin?

The VCC pin has a decoupling capacitor on 92 of 117 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 118 open source designs using the W25Q32JVSS.

What pull-up resistor is used on the W25Q32JVSS CS pin?

The CS pin has a pull-up to 3.3V on 56 of 118 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 118 open source designs using the W25Q32JVSS.

What parts are used alongside the W25Q32JVSS?

The RP2040, AP2112K-3.3, AMS1117-3.3, USBLC6-2SC6 and NCP1117-3.3_SOT223 appear in the most repositories here.

Which microcontrollers do boards using the W25Q32JVSS use?

Most are built on RP2040/RP2350 (60), STM32 (26), FPGA (15) and ESP32 (7).

How big is a typical board using the W25Q32JVSS?

The median is 70 × 57.2 mm, and 55% are two-layer designs.

What is the most popular open source board using the W25Q32JVSS?

By GitHub stars, DIY-Gaming-Mouse by wareya, with 401 stars.

Can I simulate one of these boards using the W25Q32JVSS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part