Arduinonano CC1101-shield
sridhar2rok·Arduinonano_CC1101-shield
About the Arduinonano CC1101-shield
Arduinonano CC1101-shield is an open source AVR/Arduino PCB design by sridhar2rok, published on GitHub. It is a 2-layer board measuring 94 × 100 mm, with 3 components from 3 distinct parts.
Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family.
It belongs with the rf & radio and dev boards & breakouts designs in this gallery.
From the project
Kicad PCB design: Designed specifically to work with Ebyte E07-868MS10 CC1101 module and Spaceteddy library
A custom KiCad PCB shield designed to interface an Arduino Nano with the Ebyte E07-868MS10 CC1101 RF module for sub-GHz wireless communication at 868 MHz.
This shield simplifies integration of the CC1101 transceiver with an Arduino Nano by providing:
- Clean PCB routing for the SPI interface between Arduino Nano and CC1101 - Dedicated pin headers for the Ebyte E07-868MS10 module footprint - Compatibility with the Spaceteddy CC1101 Arduino library - Gerber files ready for PCB fabrication
Main components on the Arduinonano CC1101-shield
Arduinonano CC1101-shield bill of materials (BOM)
3 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Arduino_Nano_v3.x | Arduino_Nano | A1 |
| 1 | Conn_01x08_Male | PinHeader_1x08_P1.27mm_Vertical | TI CC1101 |
| 1 | VAL** | mouse-bite-2mm-slot | mouse-bite-2mm-slot |
Arduinonano CC1101-shield design files
The KiCad project lives in the sridhar2rok/Arduinonano_CC1101-shield repository on GitHub; these links point at the commit this page was built from.
- LayoutArduino_pcb.kicad_pcb
Arduinonano CC1101-shield: common questions
What microcontroller does the Arduinonano CC1101-shield use?
The Arduinonano CC1101-shield is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.
How big is the Arduinonano CC1101-shield?
The Arduinonano CC1101-shield measures 94 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Arduinonano CC1101-shield?
3 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Arduinonano CC1101-shield design files?
From the sridhar2rok/Arduinonano_CC1101-shield repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Arduinonano CC1101-shield design in my own project?
The repository has no license, so all rights stay with sridhar2rok. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Arduinonano CC1101-shield without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k