Control Module
SSCsimsi·8Bit_Computer·8Bit Computer ver2.0/Kicad/Computer/Control_Module.kicad_pcb
About the Control Module
Control Module is an open source PCB design by SSCsimsi, published on GitHub. It is a 4-layer board measuring 93 × 171 mm, with 123 components from 40 distinct parts.
Other key parts include the MP2338GTL-Z, DS1100Z-150+, SN74F521DWR, SN74LVC1G14DBVR and SN74LVC1G08DBVR. By type, the board carries 47 capacitors, 35 ICs, 21 resistors, 7 connectors, 5 switches and 5 LEDs.
Main components on the Control Module
Control Module bill of materials (BOM)
123 components, 40 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2338GTL-Z | MP2338GTLZ | IC1 |
| 1 | DS1100Z-150+ | SOIC127P600X175-8N | IC3 |
| 5 | SN74F521DWR | SOIC127P1030X265-20N | IC155, IC156, IC224, IC225, IC226 |
| 9 | SN74LVC1G14DBVR | SOT95P280X145-5N | IC157, IC158, IC159, IC164, IC227, IC228, IC229, IC230 +1 |
| 1 | SN74LVC1G08DBVR | SOT95P280X145-5N | IC160 |
| 2 | SN74LVC1G32DBVR | SOT95P280X145-5N | IC161, IC163 |
| 1 | SN74HCS4075DR | SOIC127P600X175-14N | IC162 |
| 4 | CY74FCT163CTSOC | SOIC127P1030X265-16N | IC165, IC166, IC167, IC168 |
| 2 | SN74ABT574ADWR | SOIC127P1030X265-20N | IC231, IC232 |
| 3 | SN74AHC74DR | SOIC127P600X175-14N | IC233, IC264, IC270 |
| 2 | SN74ABT245BDWR | SOIC127P1030X265-20N | IC234, IC235 |
| 1 | SN74LVC1GU04DCKR | SOT65P210X110-5N | IC266 |
| 1 | TMUX1309DYYR | SOP50P326X110-16N | IC267 |
| 1 | LM555CMX/NOPB LM555CMX_NOPB | SOIC127P600X175-8N | IC269 |
| 1 | ~ | USB_C_PD_Triggerboard | U1 |
| 1 | 8MHZ 8MHz | Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 7 | M20-8890845 | M208890845 | J18, J19, J20, J21, J22, J23, J24 |
| 2 | B3FS-4055P | B3FS4055P | S1, S14 |
| 3 | 2MS1T2B3M2QES | 2MS1T2B3M2QES | S11, S12, S13 |
| 1 | M61P104KT20T607 | M61P104KT20T607 | VR1 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | LTST-C170KFKT | LEDC2012X120N | LED22, LED23, LED24, LED25, LED26 |
| 1 | 6.8UH 6.8uH | INDPM108100X400N | L1 |
| 3 | 22UF 22uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C3 |
| 2 | 0.1UF 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 1 | 22NF 22nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C8 |
| 1 | 300PF 300pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C10 |
| 2 | 27PF 27pF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C243, C245 |
| 36 | 100NF 100nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C244, C246, C247, C248, C251, C252, C253, C254 +28 |
| 1 | 10NF 10nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C249 |
| 1 | 4.7UF 4.7uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C250 |
| 3 | 10K 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R5, R7 |
| 1 | 191K 191k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 49.9K 49.9k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 90.9K 90.9k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 5 | 4.7K 4.7k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R20, R68, R69, R70, R71 |
| 2 | 1M | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R63, R66 |
| 1 | 330 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R64 |
| 1 | 100 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R65 |
| 1 | 1500 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R67 |
| 5 | 150 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R77, R78, R79, R80, R81 |
Control Module design files
The KiCad project lives in the SSCsimsi/8Bit_Computer repository on GitHub; these links point at the commit this page was built from.
Control Module: common questions
How big is the Control Module?
The Control Module measures 93 × 171 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Control Module?
123 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Control Module design files?
From the SSCsimsi/8Bit_Computer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Control Module design in my own project?
The repository has no license, so all rights stay with SSCsimsi. Use it as a reference, and ask the author before reusing the design.
More boards in 8Bit_Computer
Computer
SSCsimsi
166 × 317 mm994 parts4LNo license0ALU Module
SSCsimsi
166 × 317 mm625 parts4LNo license0Input Output Module
SSCsimsi
153 × 81 mm150 parts4LNo license0Memory Module
SSCsimsi
116 × 135 mm89 parts4LNo license0ClockGen
SSCsimsi
27.7 × 17.5 mm9 parts2LNo license0ProgrammeAdapter
SSCsimsi
18.9 × 66.1 mm4 parts2LNo license0