12 open source boards using the MP2338GTL-Z

Real designs built with the MP2338GTL-Z, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the MP2338GTL-Z

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MP2338GTL-Z connects to, and the resistors, capacitors and other passives placed on it.

  • The BST pin has a series capacitor on 5 of 5 designs, most often 100 nF.
  • The SW pin has a series capacitor on 4 of 5 designs, most often 100 nF.
  • The SW pin has a inductor on 4 of 5 designs, most often 6.8 µH.
  • The SS pin has a capacitor to GND on 4 of 4 designs, most often 22 nF (then 22 µF).
PGpin 1Connected to: Not connected 40% · 3.3V 20% · a signal 40%
  • Pull-up to VCC on 40% · 10 kΩ (2)
VINpin 2Connected to: VBAT 100%
  • Decoupling capacitor on 40% · 100 nF (2), 22 µF (1)
SWpin 3Connected to: Signal 80% · VBAT 20%
  • Series capacitor on 80% · 100 nF (4)
  • Inductor on 80% · 6.8 µH (4)
GNDpin 4Connected to: GND 100%
BSTpin 5Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5)
ENpin 6Connected to: Signal 80% · VBUS2 20%
  • Resistor to GND on 60% · 49.9 kΩ (2), 22 kΩ (1)
  • Pull-up to VBUS on 60% · 191 kΩ (2), 180 kΩ (1)
SSpin 7Connected to: Signal 100%
  • Capacitor to GND on 100% · 22 nF (3), 22 µF (1)
FBpin 8Connected to: Signal 100%
  • Series resistor on 100% · 10 kΩ (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Balise tofs by EsialRobotik, EEE3088F Project 2025 by Rasekoai, ALU Module by SSCsimsi and STM32 by TeganJohnson.

The MP2338GTL-Z in open source designs

The gallery holds 12 open source boards using the MP2338GTL-Z from 6 GitHub repositories; a typical one measures about 116 × 101.6 mm and carries around 93 components.

73% use four copper layers or more, and 0% carry an open source license.

The most starred is Computer by SSCsimsi.

Microcontrollers on boards using the MP2338GTL-Z

What boards using the MP2338GTL-Z are built for

MP2338GTL-Z: common questions

Where can I find a MP2338GTL-Z reference design?

Each of the 12 boards on this page is a real design using the MP2338GTL-Z. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MP2338GTL-Z BST pin connected?

The BST pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MP2338GTL-Z.

How is the MP2338GTL-Z SW pin connected?

The SW pin has a series capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the MP2338GTL-Z.

How is the MP2338GTL-Z SS pin connected?

The SS pin has a capacitor to GND on 4 of 4 designs, most often 22 nF (then 22 µF). Counted from the KiCad layouts of 5 open source designs using the MP2338GTL-Z.

What parts are used alongside the MP2338GTL-Z?

The CH224K, DRV8833PWP, INA219AxD, MP3423GG-Z and RT6150AGQW appear in the most repositories here.

Which microcontrollers do boards using the MP2338GTL-Z use?

Most are built on Raspberry Pi (2), STM32 (2) and RP2040/RP2350 (1).

How big is a typical board using the MP2338GTL-Z?

The median is 116 × 101.6 mm, and 27% are two-layer designs.

What is the most popular open source board using the MP2338GTL-Z?

By GitHub stars, Computer by SSCsimsi, with 0 stars.

Can I simulate one of these boards using the MP2338GTL-Z before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part