HardLabs

Adapter

SSL-A-Team·electrical·robot/radio/adapter-board/adapter/adapter.kicad_pcb

Adapter PCB layout, top view — open source STM32 board by SSL-A-Team
Simulate this board

About the Adapter PCB

Adapter is an open source STM32 PCB design by SSL-A-Team, published on GitHub under the MIT license. It is a 2-layer board measuring 41 × 22.5 mm, with 7 components from 7 distinct parts.

Its main chip is the STM32H723ZGTX, from the STM32 family. By type, the board carries 2 connectors, 2 capacitors, 1 IC, 1 diode and 1 resistor.

From the project

circuit board design files, gerbers, and circuit analysis

All current board releases use KiCad 7.X.

See releases for competition production files. Our releases include known bug documentation, and the confirmed gerber, BoM, and CPL files sent to fab so you know you're looking and ordering what we did. Releases are accompanied by a tagged commit, for all editable project files used to generate the fab products.

For complex boards like control and kicker, we include spice models and python files that compute any relevant values from datasheets, and including documented references and links to needed formulations.

Main components on the Adapter

STM32H723ZGTX

Adapter bill of materials (BOM)

7 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32H723ZGTX
~
U1
1
MEM2067-02-180-00-A
Conn_01x06
J1
1
CONN_ARM_JTAG_SWD_10
Conn_01x10
J2
1
SMBJ26CA
BL-HGE36G-AV-TRB
D1
1
C77020
4.7u
C1
1
C1518208
10u
C2
1
330
1k
R1

Adapter design files

The KiCad project lives in the SSL-A-Team/electrical repository on GitHub; these links point at the commit this page was built from.

Adapter: common questions

What microcontroller does the Adapter use?

The Adapter is built around the STM32H723ZGTX, from the STM32 family.

How big is the Adapter PCB?

The Adapter measures 41 × 22.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Adapter?

7 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Adapter design files?

From the SSL-A-Team/electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Adapter design in my own project?

Yes, under the terms of its MIT license, which SSL-A-Team chose for the repository.

Can I test firmware for the Adapter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in electrical

Similar boards