Breakbeam (Receiver)
About the Breakbeam (Receiver) PCB
Breakbeam (Receiver) is an open source PCB design by SSL-A-Team, published on GitHub under the MIT license. It is a 2-layer board measuring 22 × 52 mm, with 4 components from 4 distinct parts.
By type, the board carries 2 resistors, 1 transistor and 1 connector.
From the project
circuit board design files, gerbers, and circuit analysis
All current board releases use KiCad 7.X.
See releases for competition production files. Our releases include known bug documentation, and the confirmed gerber, BoM, and CPL files sent to fab so you know you're looking and ordering what we did. Releases are accompanied by a tagged commit, for all editable project files used to generate the fab products.
For complex boards like control and kicker, we include spice models and python files that compute any relevant values from datasheets, and including documented references and links to needed formulations.
Breakbeam (Receiver) bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BSS84 OP506B | LED_D3.0mm | Q1 |
| 1 | MEM2067-02-180-00-A Conn_01x03 | JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal | J1 |
| 1 | 330 2k | R_0603_1608Metric | R1 |
| 1 | 100 | R_0603_1608Metric | R2 |
Breakbeam (Receiver) design files
The KiCad project lives in the SSL-A-Team/electrical repository on GitHub; these links point at the commit this page was built from.
Breakbeam (Receiver): common questions
How big is the Breakbeam (Receiver) PCB?
The Breakbeam (Receiver) measures 22 × 52 mm, has 2 copper layers and is 1.59 mm thick.
How many components are on the Breakbeam (Receiver)?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Breakbeam (Receiver) design files?
From the SSL-A-Team/electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Breakbeam (Receiver) design in my own project?
Yes, under the terms of its MIT license, which SSL-A-Team chose for the repository.
More boards in electrical
STM32Kicker
116 × 126 mm253 parts6LMIT6
STM32Control
148 × 86 mm232 parts6LMIT6
STM32Power Board
90 × 92.5 mm192 parts6LMIT6
Wheel Motor Driver
45 × 46 mm87 parts6LMIT6
STM32Optical flow
60 × 53.7 mm49 parts4LMIT6
STM32Radio
65 × 34.8 mm32 parts4LMIT6
STM32Encoderboard
64 × 10 mm8 parts2LMIT6
STM32Adapter
41 × 22.5 mm7 parts2LMIT6
Breakbeam (Emitter)
22 × 52 mm7 parts2LMIT6