Temp node
About the Temp node PCB
Temp node is an open source PCB design by sslivins, published on GitHub. It is a 2-layer board measuring 35 × 21 mm, with 6 components from 6 distinct parts.
By type, the board carries 3 connectors, 2 capacitors and 1 fuse.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Open-source PCB design files for Thermux. There are two boards:
Open-source PCB design files for Thermux. There are two boards:
- Sensor Bus Hat (sensorbushat/) — plugs onto the Olimex ESP32-POE-ISO and breaks the 1-Wire bus out to an RJ45 jack, carrying the bus pull-up resistor. - Temperature Node (tempnode/`) — the distributed DS18B20 sensor breakout with RJ45 connectors for daisy-chaining sensors along the bus.
Each board's gerbers/ folder is self-contained — zip its contents (or upload the folder) to JLCPCB / PCBWay to fabricate that board.
Temp node bill of materials (BOM)
6 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TEMP_BUS_A | GCT_MJ3225-88-0_REVA | J1 |
| 1 | TEMP_SENSOR | JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal | J2 |
| 1 | TEMP_BUS_B | GCT_MJ3225-88-0_REVA | J3 |
| 1 | PTC 54mA/100mA (resettable) | Fuse_0805_2012Metric | F1 |
| 1 | 10UF 10uF | C_0805_2012Metric | C1 |
| 1 | 0.1UF 0.1uF | C_0805_2012Metric | C2 |
Temp node design files
The KiCad project lives in the sslivins/thermux repository on GitHub; these links point at the commit this page was built from.
Temp node: common questions
How big is the Temp node PCB?
The Temp node measures 35 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Temp node?
6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Temp node design files?
From the sslivins/thermux repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Temp node design in my own project?
The repository has no license, so all rights stay with sslivins. Use it as a reference, and ask the author before reusing the design.
More boards in thermux
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2k
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k