Atmosensor

ssnover·atmosensor·atmosensor-kicad/atmosensor-kicad.kicad_pcb

Atmosensor PCB layout, top view — open source STM32 board by ssnover

About the Atmosensor PCB

Atmosensor is an open source STM32 PCB design by ssnover, published on GitHub. It is a 2-layer board measuring 46 × 36 mm, with 26 components from 17 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the AMS1117-3.3 and USBLC6-2SC6. By type, the board carries 10 capacitors, 6 resistors, 3 ICs, 3 connectors, 3 diodes and 1 crystal.

It belongs with the sensors designs in this gallery.

From the project

Custom software, firmware, and hardware for air quality monitoring

Main components on the Atmosensor

Atmosensor bill of materials (BOM)

26 components, 17 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
USBLC6-2SC6
U2
1
STM32F103C8Tx
U3
1
16 MHz
Y1
1
USB_B_Micro
J1
1
SWD Connector
J2
1
QWIIC Connector
J3
1
USER_LED_1
D1
1
USER_LED_2
D2
1
PWR
D3
2
22u
C1, C2
5
100n
C3, C5, C6, C7, C8
1
10u
C4
2
10p
C9, C10
1
1.5k
R1
4
1k
R2, R3, R4, R5
1
2.2k
R6

Atmosensor design files

The KiCad project lives in the ssnover/atmosensor repository on GitHub; these links point at the commit this page was built from.

Atmosensor: common questions

What microcontroller does the Atmosensor use?

The Atmosensor is built around the STM32F103C8Tx, from the STM32 family.

How big is the Atmosensor PCB?

The Atmosensor measures 46 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Atmosensor?

26 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the Atmosensor design files?

From the ssnover/atmosensor repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Atmosensor design in my own project?

The repository has no license, so all rights stay with ssnover. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Atmosensor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards